Audiolab 8000q gain control

Hi

Just upgraded to an Audiolab 8000q for my x2 8000p (from an 8000s)

the 8000q has a gain control from 0 to 15dB in 3dBincrements and as
I'm not that technically minded can anyone advise me on the
appropriate gain setting?

Thought I'd ask here before I started fiddling.

I'm driving a pair of Wilson Benesch Arcs and I have pasted the spec
below.

thanks

Darren


Drive units
1 x 170mm (7 in) Wilson Benesch Tactic bass / mid range unit

1 x 25mm (1 in) Soft dome, hand painted silk, ultra linear Wilson
Benesch specification tweeter

Low frequency loading
Double reflex port tuning

Frequency range
-6dB at 42Hz and 30kHz

-3dB at 45Hz and 25kHz

Frequency response
46Hz to 24kHz +- 2dB on axis

Sensitivity
88dB spl at 1metre on axis. 2.83V input

Impedance
6 Ohms nominal, 4 ohms minimum

Crossover
First order mid range crossover

Second order tweeter crossover


Selected polypropylene capacitors and air cored inductors are used
throughout

Crossover frequencies
5kHz

Internal wiring
Multi stranded, silver plated copper, PTFE jacketed cable harnesses

Soldered connections throughout

Shortpath P.C.B. design


Links supplied for single or bi-wire applications


Input connections
Bi-wireable, in-house machined gold plated copper alloy terminals

Power handling
200W peak unclipped programme



Maximum spl
111dB at 1 metre




Dimensions
Height
310mm

Height on stand
950mm


Width
230mm





Depth
370mm




Internal volume
10.5 litres





Net weight
11kg


Gross weight with stand
28kg

Finishes available
Standard Finish: Polymer coated alloy.




Other finishes real wood veneers.




Contact your dealer for further information.




----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---