Accuvolt installation help!

Hi


sure- Jacobs tech is closed till 1/5, and i need to get my install done this
week while im off ( i dont begrudge them being off also, but the company I
work for is still open at least).


i need to ask some questions because i hooked up my FR750W, and am getting
no voltage passthrough at the out put terminals when off, and the gren LED
flashed (with still no voltage at the output terminals) when 12v supplied to
the ON screw.

I have about 5 feet of 4g twisetd pos/ned going to the input from the
battery.. i am powering a mac 420 (50*4), and one 200w sub amp for now.

also, to the left on the labelled input screws- there are a second set of
screws that the instruction dont show. i found out that these are POWERED.
also, the instruction show the word FUSE beside each input screw- there are
no fuses there.

i do no have the remote sense hookup in use- but- do you just leave those 2
screws unconnected to anything? each other? or, is it NOT optional, and they
have to be hooked to the output voltage?

help! this is the last step before sliding the headunit in and powring up
the system!

thanks