Pioneer Part Number?
 

Hi

Can someone tell me the part number I need to order the flexible PCB that
runs from the front panel to the main PCB on a KEH-P8400R

I thought the part number was CNP-5444 but when it arrived, it was not the
correct item.

The section of the flexi-pcb that solders to the faceplate connector block
was correct, but the other end of the cable had 8 large conductors on it. My
radio requires 9 small conductors (the ninth is not connected).

I am loathe to buy the service manual just to get the part number for one
item!

Alternatively, if anyone needs a CNP-5444 flexi-PCB and has the right one in
stock - perhaps you might be willing to swap?


Thanks,

Steve

Pioneer Part Number?
 

"Steve" ten.2ku@ekolbemag wrote in message
...
Hi

Can someone tell me the part number I need to order the flexible PCB that
runs from the front panel to the main PCB on a KEH-P8400R

Sorry to reply to my own message!

Can no-one help me with this? I think the flexible cable breaking is
probably the most common fault on Pioneer car radios.

All I want it the part number :)

Thanks!

Steve

Pioneer Part Number?
 

Hello Steve.
I have exactly the same problem. Did you finally find the part number?
If you did, could you please tell me it?
Thanks!


--
Emmanuel
------------------------------------------------------------------------
Posted via RealCarAudio.com - The checkmate of the caraudio community.
http://www.RealCarAudio.com
Emmanuel's Profile: http://www.realcaraudio.com/forums/m...fo&userid=1783
View this thread: http://www.realcaraudio.com/forums/s...?threadid=3557

Pioneer Part Number?
 

"Emmanuel" wrote in message
...

Hello Steve.
I have exactly the same problem. Did you finally find the part number?
If you did, could you please tell me it?
Thanks!

No,

I never found out the part number. What I ended up doing was soldering the
incorrect part I had ordered directly to the PCB.

To do this, I broke off the plastic socket which left the pins exposed. I
then soldered one pin to each of the conductors on the flexible cable.

Steve

Pioneer Part Number?
 

Might be a bit late now, but when I replaced the cable in my dex-p88r, I
used a company called Sema (based in Slough or Reading I think) and I
got an exploded diagram with part numbers of them also.


--
Vikash
------------------------------------------------------------------------
Posted via RealCarAudio.com - The checkmate of the caraudio community.
http://www.RealCarAudio.com
Vikash's Profile: http://www.realcaraudio.com/forums/m...fo&userid=1174
View this thread: http://www.realcaraudio.com/forums/s...?threadid=3557

Pioneer Part Number?
 

It's seme.co.uk if you contact them they can send you out an exploded
diagram and you can then tell them the part you need from that. The
flexible cord is CNP-4440 though it's difficult to solder it to the
connector. I ordered one a while ago, I'm sure it was about £17 which
is a bit over the top but it's a neccessary part so I had to pay. I had
to get a friend who works in electronics to solder it.
Hope this helps.


--
chembleton
------------------------------------------------------------------------
Posted via RealCarAudio.com - The checkmate of the caraudio community.
http://www.RealCarAudio.com
chembleton's Profile: http://www.realcaraudio.com/forums/m...fo&userid=2064
View this thread: http://www.realcaraudio.com/forums/s...?threadid=3557