Input Voltages?
 

Hi

I have the Nakamichi CD45z head connected to a JL Audio 300/4 and a 500/1
sub-amp. The inputs on the amps are switchable from 200mV-2V RMS to 800mV-8V
RMS and the Nak has 4v (is this max or RMS?) outputs. Currently I have them
set to the higher voltage input; is this the correct setting for the output
of the CD45, bearing in mind the amps specified input voltage is RMS and the
CD45z does not state whether max or RMS?

Thanks

Ben
--
Ben Robinson
Supreme Music Ltd - The Home of Eve, Recover & Discover Records and
http://www.therecordbox.com

Tel +44 (0)1273 556321 PO Box 184
Fax +44 (0)1273 503333 Hove
Mobile +44(0)7810 547715 BN3 6UY
MSN England
SIP

Input Voltages?
 

Hi

I have the Nakamichi CD45z head connected to a JL Audio 300/4 and a 500/1
sub-amp. The inputs on the amps are switchable from 200mV-2V RMS to
800mV-8V
RMS and the Nak has 4v (is this max or RMS?) outputs. Currently I have
them
set to the higher voltage input; is this the correct setting for the
output
of the CD45, bearing in mind the amps specified input voltage is RMS and
the
CD45z does not state whether max or RMS?

Is the amp starting to clip when the volume knob is about 2/3 to 3/4 the way
up? If so, then it's set correctly.