cdr500 matrix display settings
 

Hi

I have a Corsa with a Delco CDR500 with a minor fault (related to power and
seek circuits).

I've just got hold of a newer unit (still Delco, same model number) out of a
'99 Vectra, which has the two-line matrix display.

I can't get the new unit to adjust to the smaller display - is there a (not
in the manual) way to set the display type? I opened it up and there doesn't
seem to be any jumper settings or dip switches.

Any help appreciated.

Geoff

cdr500 matrix display settings
 

"Geoff Winkless" ] wrote in message
. net...
Hi

I have a Corsa with a Delco CDR500 with a minor fault (related to power
and
seek circuits).

I've just got hold of a newer unit (still Delco, same model number) out of
a
'99 Vectra, which has the two-line matrix display.

I can't get the new unit to adjust to the smaller display - is there a
(not
in the manual) way to set the display type? I opened it up and there
doesn't
seem to be any jumper settings or dip switches.

Any help appreciated.

Geoff


switch off, hold buttons 4&6 (i think) then switch on and hold buttons until
display changes from 1 setting to the other. If not 4&6 it might be 3 &5

Regards

Steve
www.autoelectronix.co.uk

cdr500 matrix display settings
 

OR 1 and 3

Andy


"Steve H" wrote in message
...

"Geoff Winkless" ] wrote in message
. net...
Hi

I have a Corsa with a Delco CDR500 with a minor fault (related to power
and
seek circuits).

I've just got hold of a newer unit (still Delco, same model number) out
of
a
'99 Vectra, which has the two-line matrix display.

I can't get the new unit to adjust to the smaller display - is there a
(not
in the manual) way to set the display type? I opened it up and there
doesn't
seem to be any jumper settings or dip switches.

Any help appreciated.

Geoff


switch off, hold buttons 4&6 (i think) then switch on and hold buttons
until
display changes from 1 setting to the other. If not 4&6 it might be 3 &5

Regards

Steve
www.autoelectronix.co.uk

cdr500 matrix display settings
 

Andy wrote:
"Steve H" wrote in
message ...
"Geoff Winkless" ] wrote in
message . net...
I've just got hold of a newer unit (still Delco, same model number)
out of a '99 Vectra, which has the two-line matrix display.

I can't get the new unit to adjust to the smaller display - is
there a (not in the manual) way to set the display type? I opened
it up and there doesn't seem to be any jumper settings or dip
switches.

switch off, hold buttons 4&6 (i think) then switch on and hold
buttons until display changes from 1 setting to the other. If not
4&6 it might be 3 &5

OR 1 and 3

Andy

Thanks for the suggestions!

I'll just press random pairs of buttons and see what happens :) :) :)

But seriously, thanks, I'll try the suggested.

Geoff

cdr500 matrix display settings
 

"Geoff Winkless" ] wrote:
Andy wrote:
"Steve H" wrote in
message ...
"Geoff Winkless" ] wrote in
message . net...
I can't get the new unit to adjust to the smaller display - is
there a (not in the manual) way to set the display type?

switch off, hold buttons 4&6 (i think) then switch on and hold
buttons until display changes from 1 setting to the other. If not
4&6 it might be 3 &5

OR 1 and 3

I'll just press random pairs of buttons and see what happens :) :) :)

Thanks guys, Steve was right - 4&6 did the trick first time. Brilliant!!

Geoff