![]() |
|
Hands free car kit not powering up
"Dr Zoidberg" wrote in message ... Ged wrote: It's an 06 octavia and it does have CAN-Bus wiring -- Alex "I laugh in the face of danger. Then I hide until it goes away" www.drzoidberg.co.ukwww.ebayfaq.co.uk Are you using the ignition feed at the head unit? Nope , into the fuse box onto a couple of spare terminals With it being CAN Bus, the fuse box most likely isn't just a fuse box. It'll have a CAN controller built in, and chances are you've probably picked up two fuses that are controlled by the CAN controller for optional extras. Hence the strange goings on with voltages. Professional installers will always take a feed direct from the battery, and unless they can find a suitable ignition controlled wire, they'll wire the kit up so it's permanently on. It just means you don't get the option of the phone turning off with the ignition (most handsfree kits will work with the igntion off anyway). |
Hands free car kit not powering up
moray wrote:
"Dr Zoidberg" wrote in message ... Ged wrote: It's an 06 octavia and it does have CAN-Bus wiring -- Alex "I laugh in the face of danger. Then I hide until it goes away" www.drzoidberg.co.ukwww.ebayfaq.co.uk Are you using the ignition feed at the head unit? Nope , into the fuse box onto a couple of spare terminals With it being CAN Bus, the fuse box most likely isn't just a fuse box. It'll have a CAN controller built in, and chances are you've probably picked up two fuses that are controlled by the CAN controller for optional extras. The fuse that I've used for the switched live is labelled with a phone symbol , suggesting it's designed for a car kit. The other one I can't remember off the top of my head. Hence the strange goings on with voltages. Indeed. Professional installers will always take a feed direct from the battery, and unless they can find a suitable ignition controlled wire, they'll wire the kit up so it's permanently on. It just means you don't get the option of the phone turning off with the ignition (most handsfree kits will work with the igntion off anyway). I'd rather not have the continual drain , even if it is low. Looks like I'll have to try and find a route through from the engine bay for a permanent 12v though -- Alex "I laugh in the face of danger. Then I hide until it goes away" www.drzoidberg.co.uk www.ebayfaq.co.uk |
Hands free car kit not powering up
I would personally take the feeds from the back of the barrel. Good
luck with it whichever route you go. |
Hands free car kit not powering up
SteveH wrote:
Dr Zoidberg wrote: Now this is a total mystery to me. It seems to vary from week to week the situations in which it will and won't power up and I'm checking all the connections with a multimeter and it *is* getting power. Why should it be happy with 12v in one place and not in another? It's that dodgy Czech build quality. Should have bought a proper VW rather than a cheap Commie copy ;-) Trying to wind us up again Steve ;-) |
Hands free car kit not powering up
Chris Bartram wrote:
SteveH wrote: Dr Zoidberg wrote: Now this is a total mystery to me. It seems to vary from week to week the situations in which it will and won't power up and I'm checking all the connections with a multimeter and it *is* getting power. Why should it be happy with 12v in one place and not in another? It's that dodgy Czech build quality. Should have bought a proper VW rather than a cheap Commie copy ;-) Trying to wind us up again Steve ;-) I need new bait, Zoidberg appears to be immune to the stuff I'm using ;-) -- SteveH 'You're not a real petrolhead unless you've owned an Alfa Romeo' www.italiancar.co.uk - Honda VFR800 - Hongdou GY200 - Alfa 75 TSpark Alfa 156 TSpark - B6 Passat 2.0TDI SE - COSOC KOTL BOTAFOT #87 - BOTAFOF #18 - MRO # - UKRMSBC #7 - Apostle #2 - YTC # |
Hands free car kit not powering up
Dr Zoidberg wrote:
moray wrote: "Dr Zoidberg" wrote in message ... Ged wrote: It's an 06 octavia and it does have CAN-Bus wiring -- Alex "I laugh in the face of danger. Then I hide until it goes away" www.drzoidberg.co.ukwww.ebayfaq.co.uk Are you using the ignition feed at the head unit? Nope , into the fuse box onto a couple of spare terminals With it being CAN Bus, the fuse box most likely isn't just a fuse box. It'll have a CAN controller built in, and chances are you've probably picked up two fuses that are controlled by the CAN controller for optional extras. The fuse that I've used for the switched live is labelled with a phone symbol , suggesting it's designed for a car kit. The other one I can't remember off the top of my head. Hence the strange goings on with voltages. Indeed. Professional installers will always take a feed direct from the battery, and unless they can find a suitable ignition controlled wire, they'll wire the kit up so it's permanently on. It just means you don't get the option of the phone turning off with the ignition (most handsfree kits will work with the igntion off anyway). I'd rather not have the continual drain , even if it is low. Looks like I'll have to try and find a route through from the engine bay for a permanent 12v though I didn't bother with the 12v switched when I last fitted a car kit- just pggybacked it all off the fag lighter- and never had any problems. |
Hands free car kit not powering up
Chris Bartram wrote:
I'd rather not have the continual drain , even if it is low. Looks like I'll have to try and find a route through from the engine bay for a permanent 12v though I didn't bother with the 12v switched when I last fitted a car kit- just pggybacked it all off the fag lighter- and never had any problems. Be careful - I had to call out the AA a couple of weeks ago - I have a 4-way adaptor in the centre cubby with sat-nav, phone and PDA chargers plugged into it. I parked the car up for 5 days or so, left everything plugged in, and came back to a battery so flat, I couldn't start the car. -- SteveH 'You're not a real petrolhead unless you've owned an Alfa Romeo' www.italiancar.co.uk - Honda VFR800 - Hongdou GY200 - Alfa 75 TSpark Alfa 156 TSpark - B6 Passat 2.0TDI SE - COSOC KOTL BOTAFOT #87 - BOTAFOF #18 - MRO # - UKRMSBC #7 - Apostle #2 - YTC # |
Hands free car kit not powering up
SteveH wrote:
Chris Bartram wrote: SteveH wrote: Dr Zoidberg wrote: Now this is a total mystery to me. It seems to vary from week to week the situations in which it will and won't power up and I'm checking all the connections with a multimeter and it *is* getting power. Why should it be happy with 12v in one place and not in another? It's that dodgy Czech build quality. Should have bought a proper VW rather than a cheap Commie copy ;-) Trying to wind us up again Steve ;-) I need new bait, Zoidberg appears to be immune to the stuff I'm using ;-) It's fairly old and stinky , and normally Zoidy will eat anything! -- Alex "I laugh in the face of danger. Then I hide until it goes away" www.drzoidberg.co.uk www.ebayfaq.co.uk |
Hands free car kit not powering up
"Dr Zoidberg" wrote in message ... moray wrote: "Dr Zoidberg" wrote in message ... Ged wrote: It's an 06 octavia and it does have CAN-Bus wiring -- Alex "I laugh in the face of danger. Then I hide until it goes away" www.drzoidberg.co.ukwww.ebayfaq.co.uk Are you using the ignition feed at the head unit? Nope , into the fuse box onto a couple of spare terminals With it being CAN Bus, the fuse box most likely isn't just a fuse box. It'll have a CAN controller built in, and chances are you've probably picked up two fuses that are controlled by the CAN controller for optional extras. The fuse that I've used for the switched live is labelled with a phone symbol , suggesting it's designed for a car kit. The other one I can't remember off the top of my head. Hence the strange goings on with voltages. Indeed. Professional installers will always take a feed direct from the battery, and unless they can find a suitable ignition controlled wire, they'll wire the kit up so it's permanently on. It just means you don't get the option of the phone turning off with the ignition (most handsfree kits will work with the igntion off anyway). I'd rather not have the continual drain , even if it is low. Looks like I'll have to try and find a route through from the engine bay for a permanent 12v though The carkit will power itself down if there's no phone connected, so I wouldn't worry about it. |
Hands free car kit not powering up
"SteveH" wrote in message k... Chris Bartram wrote: I'd rather not have the continual drain , even if it is low. Looks like I'll have to try and find a route through from the engine bay for a permanent 12v though I didn't bother with the 12v switched when I last fitted a car kit- just pggybacked it all off the fag lighter- and never had any problems. Be careful - I had to call out the AA a couple of weeks ago - I have a 4-way adaptor in the centre cubby with sat-nav, phone and PDA chargers plugged into it. I parked the car up for 5 days or so, left everything plugged in, and came back to a battery so flat, I couldn't start the car. Chargers that plug into a accessory socket generally remain active all the time (ie. LEDs usually stay on) when plugged in, whereas proper phone kits are designed to power down to minimum power if not being used. |
All times are GMT. The time now is 04:45 PM. |
|
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.0.0
Copyright ©2004-2006 AudioBanter.co.uk