A Audio, hi-fi and car audio  forum. Audio Banter

Go Back   Home » Audio Banter forum » UK Audio Newsgroups » uk.rec.audio (General Audio and Hi-Fi)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.rec.audio (General Audio and Hi-Fi) (uk.rec.audio) Discussion and exchange of hi-fi audio equipment.

quad 33 preamp - aux dc output on pin 4?



 
 
LinkBack Thread Tools Display Modes
  #11 (permalink)  
Old December 13th 03, 08:43 PM posted to uk.rec.audio
Form@C
external usenet poster
 
Posts: 55
Default quad 33 preamp - aux dc output on pin 4?

On Sun, 14 Dec 2003 09:44:19 +1300, Mike Coatham wrote:

snip

From the Quad 33 Service Manual......" The DC supply provided on pin 4 of
the output plug, derived from diode MR503, is used only as switching supply
for special installations. Its regulation is poor and it is nominally 7-8
volts at 1 milliamp maximum, intermittent rating."

It was discontinued at S/N 80,000.



Excellent! Thanks very much. Looks like its certainly no good for a
headphone amp then - never mind!
(This is S/N 57751 by the way, getting on a bit - like me... :-) )

--
Mick
http://www.nascom.info for Nascom & Gemini information
Also at http://www.mixtel.co.uk where the collection started.
Currently deserting M$ for linux... :-)

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 04:15 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.SEO by vBSEO 3.0.0
Copyright ©2004-2025 Audio Banter.
The comments are property of their posters.