![]() |
I need the specs of the Celestion Ditton 15 loudspeaker
Hello I would need the specs of the Celestion Ditton 15, like the nominal power and the efficiency, etc... Anybody have them ? Thank Gaetan |
I need the specs of the Celestion Ditton 15 loudspeaker
|
I need the specs of the Celestion Ditton 15 loudspeaker
Kalman Rubinson ) writes:
On 23 Aug 2007 19:36:58 GMT, (Gaetan Mailloux) wrote: Hello I would need the specs of the Celestion Ditton 15, like the nominal power and the efficiency, etc... Anybody have them ? I replied with the power handling to your AA post. Kal Hello Yes I did ask it in few places since there is quite nothing about Ditton 15 specs in all my Google seach. Thank Gaetan |
I need the specs of the Celestion Ditton 15 loudspeaker
"Gaetan Mailloux" wrote in message ... Hello I would need the specs of the Celestion Ditton 15, like the nominal power and the efficiency, etc... Anybody have them ? Thank Gaetan Nominal handling capacity was 15 w, impedance 4-8 ohms. Sadly my references don't give any figures for efficiency, but I recall it was low, at a guess, 80-83dB ref 2.83 volts. S. -- http://audiopages.googlepages.com |
I need the specs of the Celestion Ditton 15 loudspeaker
On 2007-08-23, Serge Auckland wrote:
"Gaetan Mailloux" wrote in message ... I would need the specs of the Celestion Ditton 15, like the nominal power and the efficiency, etc... Nominal handling capacity was 15 w, impedance 4-8 ohms. Sadly my references don't give any figures for efficiency, but I recall it was low, at a guess, 80-83dB ref 2.83 volts. From http://www.audiokarma.org/forums/arc...p/t-8894.html: "The Ditton 15 was very popular in the mid70's in the UK, Oz and not sure where else. Specs are : Suggested amp rating 10-30 watts Freq response 30 hz to 15 KHz. Sensitivity 4.2 Pink noise W at 1M 90Db - whatever that means :)" If this is reliable [1] the sensitivity was about 84 dB SPL at 1 metre for 1 W (actual/nominal?). [1] There's no real evidence but the 15 kHz is about right for a speaker using a HF1300 and no super tweeter as they did in the Ditton 15s (but not the 15XRs IIRC). -- John Phillips |
I need the specs of the Celestion Ditton 15 loudspeaker
"John Phillips" From http://www.audiokarma.org/forums/arc...p/t-8894.html: "The Ditton 15 was very popular in the mid70's in the UK, Oz and not sure where else. Specs are : Suggested amp rating 10-30 watts Freq response 30 hz to 15 KHz. Sensitivity 4.2 Pink noise W at 1M 90dB If this is reliable [1] the sensitivity was about 84 dB SPL at 1 metre for 1 W (actual/nominal?). ** Bad maths. 4.2 volts is 3.4 dB more than a nominal 8 ohm watt ( ie 2.83 volts) So, the maker's rated 1 watt sensitivity is 86.6 dB SPL. ........ Phil |
All times are GMT. The time now is 01:19 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.0.0
Copyright ©2004-2006 AudioBanter.co.uk