I have a mixer here which is din based but a sound box for the computer
which is line based and at full up there is not enough level. What I was
looking for is a little amplifier which I could put in between one and the
other to leave and forget that has no hum hiss or other nasty habits.
Anyone seen anything like this around?
Brian

--
----- -
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please!

In article ,
Brian Gaff wrote:
I have a mixer here which is din based but a sound box for the computer
which is line based and at full up there is not enough level. What I
was looking for is a little amplifier which I could put in between one
and the other to leave and forget that has no hum hiss or other nasty
habits.
Anyone seen anything like this around?
Brian

You'd think they'd be common, given how often this sort of thing arises.
But they don't seem to be.

--
*Time is fun when you're having flies... Kermit

Dave Plowman London SW
To e-mail, change noise into sound.

Humph, well i thought it was me.
a single transistor stage with, say an emitter follower would suffice
though these days the over designers would probably use an Ic.
Brian

--
----- -
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please!
"Dave Plowman (News)" wrote in message
...
In article ,
Brian Gaff wrote:
I have a mixer here which is din based but a sound box for the computer
which is line based and at full up there is not enough level. What I
was looking for is a little amplifier which I could put in between one
and the other to leave and forget that has no hum hiss or other nasty
habits.
Anyone seen anything like this around?
Brian

You'd think they'd be common, given how often this sort of thing arises.
But they don't seem to be.

--
*Time is fun when you're having flies... Kermit

Dave Plowman London SW
To e-mail, change noise into sound.

On Tue, 4 Jul 2017 19:23:34 +0100, "Brian Gaff"
wrote:

a single transistor stage with, say an emitter follower would suffice
though these days the over designers would probably use an Ic.
Brian

Under-designers, you mean. With an IC you don't have to do any design
- just set two resistors to give you the gain you want.

And that is exactly how I would do this - it's by far the best way.

d

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

If you don't want the faff of getting the bits and building it then
N47FL at £6.99 from Maplin will do the job. Uses a NE5532 amp chip so
should be very low noise. Supply is 3-25V so any old PSU you have
lying around....


--
Woody

harrogate3 at ntlworld dot com

On Tue, 4 Jul 2017 20:27:14 +0100, "Woody"
wrote:

If you don't want the faff of getting the bits and building it then
N47FL at £6.99 from Maplin will do the job. Uses a NE5532 amp chip so
should be very low noise. Supply is 3-25V so any old PSU you have
lying around....

That is exactly what brian is looking for

d

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

On 04/07/2017 20:27, Woody wrote:
If you don't want the faff of getting the bits and building it then
N47FL at £6.99 from Maplin will do the job. Uses a NE5532 amp chip so
should be very low noise. Supply is 3-25V so any old PSU you have
lying around....



"Fun to solder…" Not an expression I would use :-)

--
Graeme Wall
This account not read.

"Don Pearce" wrote in message
...
On Tue, 4 Jul 2017 20:27:14 +0100, "Woody"
wrote:

If you don't want the faff of getting the bits and building it then
N47FL at £6.99 from Maplin will do the job. Uses a NE5532 amp chip
so
should be very low noise. Supply is 3-25V so any old PSU you have
lying around....

That is exactly what brian is looking for


Was it Brian that was looking for it? I thought it was Duncan or Dave.

Brian might have a problem with it as it is in kit form!



--
Woody

harrogate3 at ntlworld dot com

On Tue, 4 Jul 2017 20:41:11 +0100, "Woody"
wrote:


"Don Pearce" wrote in message
...
On Tue, 4 Jul 2017 20:27:14 +0100, "Woody"
wrote:

If you don't want the faff of getting the bits and building it then
N47FL at £6.99 from Maplin will do the job. Uses a NE5532 amp chip
so
should be very low noise. Supply is 3-25V so any old PSU you have
lying around....

That is exactly what brian is looking for


Was it Brian that was looking for it? I thought it was Duncan or Dave.

Brian might have a problem with it as it is in kit form!

I'm sure he can find someone happy to put that together.

d

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

"Graeme Wall" wrote in message
news
On 04/07/2017 20:27, Woody wrote:
If you don't want the faff of getting the bits and building it then
N47FL at £6.99 from Maplin will do the job. Uses a NE5532 amp chip
so
should be very low noise. Supply is 3-25V so any old PSU you have
lying around....



"Fun to solder." Not an expression I would use :-)

--
Graeme Wall
This account not read.



I would be grateful if contributors would make sure they attribute
comments to their sources. The quote above is exactly what I wrote
and I said nothing about 'fun to solder.'

Mind you if you have been taught and know how to solder properly it is
easy and can be 'fun.'


--
Woody

harrogate3 at ntlworld dot com