"Andy Evans" wrote in message
...
Ua: 430V this is the voltage on the anode of the output valves

Vg2: 440V this is the voltage on the screen grids (g2) -

Vg1: -36V this is the fixed bias on the grid, or g1 (grid one, the
control
grid, where the signal goes in)

32mA at 430v would only give you about 13 watts, which is pretty
conservative,
but OK I guess.


No, summat's not right here - this amp'll trounce my KiT88 which pushes out
32wpc. (Volume, not*quality* mind....;-)

It's running into a pair of Fluffy Bunny DM2As (84dB according to that nice
Mr P) and it stoke's 'em like a wild thing! (Runs out of puff at about the 2
o' clock mark, tho'....???)