"malcolm" wrote in message
news:ES7cb.565133$uu5.93404@sccrnsc04...
hello folks
well after much glueing and coughing ,
I have fitted the roof felt damping to all internal surfaces of my
speakers.
I have got through 8 tubes of silicone and similar of Liquid Nails,
just need to cut the driver apertures, fit some terminals,
and felt to the front panel and then I can start to stuff them,
so in 2 or 3 days I should be able to listen to them at last.
I will make up a webpage soon and put some photos there.
regards malcolm

http://www.geocities.com/malc_hurn/speakers1.jpg
early pic of bare cabinets

**I trust you will be bracing those cabinets. They look suspiciously like
standard 19mm chipboard/MDF to me. Not thick, or rigid enough, by far, for
the Bailey design. Don't forget to run a T-line for the midrange. It makes a
big difference. I used a tube which all the way through the enclosure.


--
Trevor Wilson
www.rageaudio.com.au