"Tony Gartshore" wrote in message
...
In article ,
says...

I'm definitely no expert but am just finishing off a pair of hefty DIY
floorstanders. They are on stands that are basically MDF boxes filled
with
building sand....just an idea you might consider for home made stands. A
bit
easier than half a ton of paving slabs :-)

Also, if the problem you have is with limited treble dispersion then you
might consider angling your floorstanders up slightly.

Or sitting closer to the floor !



Yes, cutting the legs off his chair would be a lot less work than stacking
paving slabs up - 40 cm is 10 'domestic' pavings or 8 'industrial' paving
per side...!!

Or he could just swap the floorstanders for standmounters and do the job
properly....

;-)