On Fri, 21 Oct 2005 16:51:38 +0100, "Munish" wrote:

How do I connect the blue antenna adapter wire to the harness or the head
unit?

The best way would be to strip a bit of the insulation back on the
blue cable, wrap the bare end of the PC552 power feed around it,
solder and then insulate.

Only the yellow (battery) and the red (ignition) wires need to be swapperd
around.

Alpine head units normally have provision for doing this in the
original wiring harness. There are normally a couple of bullet
connectors inline that you can disconnect and swap over.

Jon
--
In-Car Express http://www.incarexpress.co.uk
Car Audio | Security | Multimedia | Navigation
Tel. 01223 301212 Fax. 0870 7484 123