View Single Post
  #8 (permalink)  
Old October 24th 05, 03:56 PM posted to uk.rec.audio.car
In-Car Express
external usenet poster
 
Posts: 164
Default Pug 407 - where to start?

On Fri, 21 Oct 2005 21:42:08 GMT, "Mark R Penn"
wrote:

Trouble is, I'm not sure where to start with any upgrades. Any advise about
where to look first would be appreciated - will upgrading speakers be
pointless without a better head end? Is the quality of the sub woofer likely
to be suspect? etc etc etc.


Depending on your budget, it might be worth looking at JL Audio's new
CleanSweep processor. You'd also need to add an additional amp, plus
possibly speakers as well (I'd probably change the fronts first and
assess the system from there), so it's not the cheapest option, but
seems to work extremely well.

http://mobile.jlaudio.com/products_c...php?page_id=79

In effect, this takes a poor quality audio signal from the OEM head
unit, measures and equalises it, and then sends it back out as a high
voltage preout which you can connect to aftermarket amplification. The
advantage to this is that you'd then be able to uprate power,
speakers, etc, but keep a stock looking interior and retain the
existing remote display. The only minor downpoint is that it has it's
own volume control - so although your steering remote volume will
still work, it's preferable preset the radio volume and to use the one
on the EQ.

Jon
--
In-Car Express http://www.incarexpress.co.uk
Car Audio | Security | Multimedia | Navigation
Tel. 01223 301212 Fax. 0870 7484 123