"Don Pearce" wrote in message
...
On Thu, 1 Jun 2006 16:21:35 +0100, "Keith G"
wrote:

Like this f'rinstance: Go scrute my new/latest 'Faure' horns:

http://www.apah69.dsl.pipex.com/show/faure.JPG

http://www.apah69.dsl.pipex.com/show/faure2.JPG

The drivers are just out the box and fitted only an hour or so ago and
they
*already* sound very **beguiling**!! (Takes weeks to get 'em browned in
properly, but they are amazing right from the off!!) My first 'custom'
design (OK, *tweaked* Fostex standard design....)

Your carpentry is definitely improving - but the cable entry? Do tell!



Hexcuse me?

I take it you are referring to the Jerichos (the Faures are the black
ones) - you tell me how you would run the cable??

See here for a glimpse of the internals:

http://www.apah69.dsl.pipex.com/show/jerichos.JPG

(Note the fakkin' sawdust everywhere!!)

We *horn builders*....

pauses for effect

....like to run our cables so the drivers can be taken out in a jiffy and the
cable pulled all the way out and swapped without fuss - I can thread a new
cable through the big 'ole the front in moments! (The cable has a big knot
in it inside, so it can't pull on the driver's connector lugs! ;-)

The Faures have a standard (banana plugs &c.) terminal tray in the back,
you'll no doubt be relieved to hear, you old *conventionalist*....!!

:-)