View Single Post
  #50 (permalink)  
Old June 18th 06, 11:40 AM posted to uk.rec.audio
Glenn Richards
external usenet poster
 
Posts: 397
Default bi-wire config question

Don Pearce wrote:

As opposed to you, who has already proved in a previous post that
you have no idea how an earth loop works, interpreted "two signals"
to mean combining a stereo signal onto a single core and couldn't
understand the correlation between "unwanted signal" and "noise"
(hint - "noise" is any "unwanted signal") etc etc.

Glenn, I said no such thing - as that is complete nonsense. If that
is what you interpreted from what I said, it only illustrates your
lack of understanding.


No, that was exactly what you said. You were harping on about "why would
you send two signals down one cable", completely missing the point that
noise is a signal, just one that isn't wanted.

It isn't me that is suffering from a lack of understanding here. I
suggest you go and take a look in the mirror.

--
Glenn Richards Tel: (01453) 845735
Squirrel Solutions http://www.squirrelsolutions.co.uk/

IT consultancy, hardware and software support, broadband installation