In article ,
says...
Get a wiring harness adaptor (you only need the speaker plug and socket,
the power can pass straight through). Cut the rear speaker wires between
plug and socket and attach to some decent quality speaker cable long
enough to route to the back of the car, then re-attach. Leave the front
speaker wires attached between the plug and socket on the wiring harness.

Ah, nice simple and easy.

I like that. As it is VAG Mk4 Golf based I've had to swap the ign/perm
live over using the fuse connectors.

I could swap them back and fit a VAG adaptor instead and and add the
speaker wire tails onto there. Maybe even fit the tails with bullet
adaptor so they can be fitted into the speaker wiring once the wiring is
run. That way I could solder the tails onto the wires, instead of crimps
or scotchblocks but it would still be removable to put the car back to
factory.
--
Carl Robson
Audio stream: http://www.bouncing-czechs.com:8000/samtest
Homepage: http://www.bouncing-czechs.com
Now Playing at home:Robert Johnson-Honeymoon Blues