View Single Post
  #4 (permalink)  
Old February 7th 07, 03:05 PM posted to uk.rec.audio.car
Elder
external usenet poster
 
Posts: 20
Default Range rover classic wiring.

In article ,
says...
On Tue, 6 Feb 2007 21:35:06 -0000, Elder
wrote:

I'm going to go out on a limb here, but would a rangie classic (mid
eighties) be just a bunch of bare wires rather than a proprietory or ISO
connector block.


Earlier ones had a bundle of Lucas bullet connectors. If it's still
got these intact, you can use standard 15amp bullets to plug into
them.Later ones have ISOs.

Jon

Cheers. I asked similar on the rangie/landie newsgroup. Nobody mentioned
the bullets, but it seems that quite often, the classics are owned by
muppets just before they get sold cheap and rusty and the looms are just
cut.

If need be, I'll wire in an ISO anyway. I've done it before.

I've gotten 2 wiring colours variances. Seems they both used the same
colours, but connected to different speakers.
--
Carl Robson
Audio stream:
http://www.bouncing-czechs.com:8000/samtest
Homepage: http://www.bouncing-czechs.com