Audio Banter - View Single Post

**joner** · #3 (**permalink**) May 4th 07, 02:40 PM

Quote:

Originally Posted by InCar Express

On Fri, 4 May 2007 02:44:29 +0100, joner
wrote:

should I.....
a) put some sort of barrier between magnet & door enclosing speaker
rear end in as if it were in a case? or suggestions please...

6x9s are generally designed to work in an large volume enclosure
(ie.something the size of a typical car boot) so doing this will
probably have a negative effect, as you're further reducing the size
of an already smaller than normal mounting enclosure.

You will almost certainly benefit though from applying a decent amount
of soundproofing material (ie. dynamat or similar) around the speaker
mounting location, and on the back of the outer door skin. This should
remove a lot of resonance from the panels, which will help improve the
sound quality.

Jon
--
In-Car Express http://www.incarexpress.co.uk
Car Audio | Security | Multimedia | Navigation
Tel. 01223 750700 Fax. 01223 858403

cheers jon
not exactly what i was hoping for but thanks anyway...I will see what they sound like
just so i can justify spending 3.5 days butchering me pug like a crazyboy..i wil take your advice & soundproof as best i can...i should point out that the speakers will not sit inside the metalwork of the door as the oem`s did due to the way i constructed new mountings.......... the magnet only just (by a whisker) protruds past the rear plate (mdf 12mm)so i should be able to practicly enclose them totaly.....anyway thanks again for the advice i will fiddle aplenty and see what i can come up with...