"TonyL" wrote in message
...
For those who build equipment in small batches...what system do you use
for front panel signwriting ? I need something better than "letter by
letter" press-on dry transfer systems.

Is there a system where you can print direct from PC onto some sort of
special sheet and then transfer results to a front panel ?

Thanks.

letraset do a film-based system called SafMat. You print onto the
transparent film from an inkjet printer, peel off the self-adhesive film and
apply to the ali. You have to be a bit careful in handling and I would
suggest a few coats of varnish. Costs about £20 to 25 or so.

More info at here
http://www.letraset.com/design/shopd...at=Inkjet+Film