Thread: AKG C451 mics
View Single Post
  #5 (permalink)  
Old May 30th 09, 10:05 AM posted to uk.rec.audio
Alan S.
external usenet poster
 
Posts: 11
Default AKG C451 mics

"David Looser" wrote in
:

"Alan S." wrote in message
.145...
"Brian Gaff" wrote in
m:

Does the buzz happen in any location, or just in one. I was thinking
some kind of inductive or rf pick up in the particular location,
after all, not much to go wrong in this way is there?
Brian


It has been apparent at two different locations in particular, both
of them
CofE churches as it happens. It was, however, with the same mic
cables.


Then I think the cables might well need looking at.


Yes, it's looking that way. I'll bet there's a rogue somewhere! Now
where's my bright-eyes?



Can
I assume that the phantom power supply would not work if one leg or
ground is missing on the cable? They were each approximately
25metres.


If ground is missing the phantom power will not work. It will work if
one leg is missing, but you will get poor audio and added noise.


David.





Thanks again.

Alan S.