Who recalls the RT and VC kit transistor radio called the Elegant 7,
refering to a whole seven transistors!
I built one of these, but the output transistors were faulty and after ten
minutes they would get very hot and the output would stop. Tuurn it off for
a few minutes and it did it all again. In the end the company sent us a set
of matched GET 114s and all was well!

Brian

--
Brian Gaff -
Note:- In order to reduce spam, any email without 'Brian Gaff'
in the display name may be lost.
Blind user, so no pictures please!
"Engineer" wrote in message
...
On Dec 14, 10:23 am, "David Looser"
wrote:
"Ian Bell" wrote in message

...

Don Pearce wrote:
Interesting insight into the way things were in the 60s - I've just
been reading a Wireless World from November of that year. Valves
(tubes for those across the pond) were extremely cheap. And
transistors cost pretty much the same, which is why we treated them
with kid gloves and thermal shunts when soldering them into circuits.

http://www.soundthoughts.co.uk/look/valves.jpg

Money conversion for the young and foreign:

20 shillings to the pound, 12 pence to the shilling. A price given as
5/6 meant five shillings and six pence. So an ECC84 at 6/6 is 32.5
pence in today's money. A 28012 transistor, by contrast at 140/- is
seven pounds - getting on for half the weekly wage of some people back
then.

I may post some ads for complete equipment later, just to make you
cry.

d

I have some WW from 1940 to 46 - I'll see if I can find a camparison
page.

Valve prices didn't change much in money terms between the 1930s and the
1960s. There might have been a slight reduction, but not a lot. Of course
inflation was low during that time too. Transistors on the other hand
dropped dramatically in price and carried on doing so for a long time. An
article I have from a 1952 edition of 'Radio Constructor' refers to "some
(transistors) the writer recently obtained from the USA cost almost as
much
as a miniature receiver". Whilst these days a bag of 100 BC548s costs but
a
few pennies each.

David.

Ian

Way, way back, I nearly cried when I fried an OC71 in an audio stage I
was trying to make!
Cheers,
Roger