"Jim Lesurf is a ****wit LIAR "

During the first years of manufacture the ampliers/recievers in the
Armstrong 600 range used a thermal delay relay to avoid a surge when
the unit was switched on.

** All you needed was a simple NTC thermistor.

You wanking IMBECILE !!!!!!!


These were expensive. And they were one of the main failure modes
which brought sets back for repair. One of the reasons I avoid
physical relays. I replaced them in later sets with a better PSU that
simply didn't need a mechanical relay. Over the following few years it
was quite clear that this had a big impact on the reliability of the
sets.


** So the pig ignorant pommy ****wit was so stupid he used one of these ?

http://www.tpub.com/content/neets/14...4175_153_1.jpg

The kind on the left - I bet.

You lose you bet on both counts. :-)

I did not use them. I replaced them with something else.

Nor was that type used.


** Really ?????

How ****ing typical of a grossly autistic **** like Jim Lesurf to only
ever ALLUDE to something while never saying what it is, so forcing folk to
make guesses.

Then he still refuses to be specific.

It must been an even stupider choice than the one above.

Hope the lying pommy **** gets cancer - ASAP.




...... Phil