View Single Post
  #10 (permalink)  
Old December 13th 03, 08:43 PM posted to uk.rec.audio
Form@C
external usenet poster
 
Posts: 55
Default quad 33 preamp - aux dc output on pin 4?

On Sun, 14 Dec 2003 09:44:19 +1300, Mike Coatham wrote:

snip

From the Quad 33 Service Manual......" The DC supply provided on pin 4 of
the output plug, derived from diode MR503, is used only as switching supply
for special installations. Its regulation is poor and it is nominally 7-8
volts at 1 milliamp maximum, intermittent rating."

It was discontinued at S/N 80,000.



Excellent! Thanks very much. Looks like its certainly no good for a
headphone amp then - never mind!
(This is S/N 57751 by the way, getting on a bit - like me... :-) )

--
Mick
http://www.nascom.info for Nascom & Gemini information
Also at http://www.mixtel.co.uk where the collection started.
Currently deserting M$ for linux... :-)