If by phone input you mean one with RIAA bias-correction, then why not
just take the line out of that amp to your soundcard instead. That's
what I did, the results were very acceptable, and I reckoned it was a
lot easier than faffing around with a preamp, and trying to avoid it
introducing hum that I'd already spent so many hours trying to remove.

On Mon, 16 Feb 2015 14:47:58 +0000, Sumatriptan
wrote:

I do have an ancient amplifier with mm phono input (anyone remember the
Texan amp kit?) to do initial testing but my aim is to get a preamp to
convert to line level for PC input. I may get a battery preamp as
suggested by Jim in the other thread.
--
================================================== =======
UK Residents: If you feel can possibly support it
please sign the following ePetition
before closing time of 30/03/2015 23:59:

http://epetitions.direct.gov.uk/petitions/71556
================================================== =======
Please always reply to ng as the email in this post's
header does not exist. Or use a contact address at:
http://www.macfh.co.uk/JavaJive/JavaJive.html
http://www.macfh.co.uk/Macfarlane/Macfarlane.html