On 27/02/2015 7:09 AM, Sumatriptan wrote:
On 16/02/2015 14:04, Sumatriptan wrote:
Yesterday, I got a Dual 505 on Ebay for £77.

Hi all,

More from a born again vinyl user..

When the tt arrived it was packed in the original Dual packing which
would have been fine, except the transit screws were not tightened and
the counterweight was left attached to the tone arm for transit. The 505
counterweight has a plastic stem, unlike later 505-x models. Sure
enough, it was broken and the weight was rattling around in the package.

The sender agreed to compensate me for purchase of a replacement if I
could locate one. A few messages at the Vinyl Engine forum resulted in
this:

http://www.dualfred.de/

Alfred and his wife who run this shop in Munich have a large stock of
apparently new Dual and Thorens turntable parts. I saw the exact part I
needed on their website. It took a week to arrive and the brand new
boxed part is labeled 'Original Dual Zubehor'

As I don't have a fully functional preamp and the main point of this
exercise is to get some/all of my collection digitised I decided to
obtain a Behringer phono-USB UFO202 interface to quickly get up and
running.

I haven't done a proper setup yet apart from tracking weight adjustment
to try out the tt for basic operation. All seems well so far, after a
listen via Audacity...except for one issue. There is significant mains
hum which I haven't tried to fix yet.

And that's where I'm at.

**The hum is likely to be one of the following:

* Dodgy RCA connectors/leads.
* Dodgy arm wiring (unlikely).
* Dodgy headshell (most likely).

If it is the headshell (the detachable bit that hold the cartridge),
send it back.


--
Trevor Wilson
www.rageaudio.com.au

---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com