At the moment I'm running it on a laptop running xp.
It says it should just work when plugged in, whell it does but at a low
level.
Brian

--
From the Sofa of Brian Gaff Reply address is active
Remember, if you don't like where I post
or what I say, you don't have to
read my posts! :-)
"Eiron" wrote in message
...
On 15/12/2015 15:28, Brian-Gaff wrote:
Hi I have bought from amazons one of their sound adaptors with phonos on
the
back in the hope of being able to use it for recording line level stuff,
and
output line level stuff. Info is quite vague on the instruction leaflet,
but
it suggests it has a cd with it, but none was sent as it seems to work
when
you plug it in. Or should I say not work.
The output from the phone output sockets seems to be very low indeed so
am
I missing something here. I note it has an input switch which seems to
allow
a standard pick up to be used or line level signals. It also has an
output
for headphones with a volume, but surely the output from the phono out
sockets should be at least as loud as the socket on the original internal
sound card?

Am I missing something vital??

The drivers from the Behringer web site?

Also if you're using Windows 7, the volume control/mixer is a nightmare.

--
Eiron.