
December 29th 03, 11:08 AM
posted to uk.rec.audio.car
|
|
Whalfedale WCD 712
Hi,
I have just installed a Whalfedale WCD 712 and set the clock and radio
stations but it cant seem to remember what I just input, i.e. when I turn
the engine off and on again the clock goes back to 12:00 and the preset
radio stations are lost. Anyone have this cd player and know what I might be
doing wrong?
Cheers,
Tim
|

December 29th 03, 11:39 AM
posted to uk.rec.audio.car
|
|
Whalfedale WCD 712
"Tim J" wrote in message
...
Hi,
I have just installed a Whalfedale WCD 712 and set the clock and radio
stations but it cant seem to remember what I just input, i.e. when I turn
the engine off and on again the clock goes back to 12:00 and the preset
radio stations are lost. Anyone have this cd player and know what I might
be
doing wrong?
Cheers,
Tim
you've not got the power wires the correct way round,
the permanant live is connected to the accessory live position on the
stereo, and vise versa, so when the ignition goes off, all power is removed
from the stereo, and it looses power to keep the memories and clock etc.
the handbook should have told you about different cars having the permanent
and ignition switched power wires in differnet positions on the iso
connectors.. VW do this mainly, but as VW controll so many cars nowadays,
skoda, seat, audi and so on will be the same,
|

December 29th 03, 02:17 PM
posted to uk.rec.audio.car
|
|
Whalfedale WCD 712
Thanks for the reply. I dont have a handbook for the stereo cos I got it
second hand. Where will I find these wires so I can switch them? The car is
a Vauxhall Cavalier.
Cheers.
"CampinGazz" wrote in message
...
"Tim J" wrote in message
...
Hi,
I have just installed a Whalfedale WCD 712 and set the clock and radio
stations but it cant seem to remember what I just input, i.e. when I
turn
the engine off and on again the clock goes back to 12:00 and the preset
radio stations are lost. Anyone have this cd player and know what I
might
be
doing wrong?
Cheers,
Tim
you've not got the power wires the correct way round,
the permanant live is connected to the accessory live position on the
stereo, and vise versa, so when the ignition goes off, all power is
removed
from the stereo, and it looses power to keep the memories and clock etc.
the handbook should have told you about different cars having the
permanent
and ignition switched power wires in differnet positions on the iso
connectors.. VW do this mainly, but as VW controll so many cars nowadays,
skoda, seat, audi and so on will be the same,
|

December 29th 03, 03:40 PM
posted to uk.rec.audio.car
|
Banned
|
|
First recorded activity by AudioBanter: Aug 2003
Posts: 18
|
|
Whalfedale WCD 712
All being well you should have a red and a yellow cable coming from the
stereo. These are the two cables to be switched (they're usually on bullets
these days but I can't say for sure on a Whalfdale unit).
Regards
Nick
--
Car Electronics Ltd
www.cel-direct.com
Express Order Line: 0116 244 9845
Pre-sales Advice: 0116 244 9846
Fax: 0116 244 9855
E-mail: nick "at" cel-direct.com
"Tim J" wrote in message
...
Thanks for the reply. I dont have a handbook for the stereo cos I got it
second hand. Where will I find these wires so I can switch them? The car
is
a Vauxhall Cavalier.
Cheers.
"CampinGazz" wrote in message
...
"Tim J" wrote in message
...
Hi,
I have just installed a Whalfedale WCD 712 and set the clock and radio
stations but it cant seem to remember what I just input, i.e. when I
turn
the engine off and on again the clock goes back to 12:00 and the
preset
radio stations are lost. Anyone have this cd player and know what I
might
be
doing wrong?
Cheers,
Tim
you've not got the power wires the correct way round,
the permanant live is connected to the accessory live position on the
stereo, and vise versa, so when the ignition goes off, all power is
removed
from the stereo, and it looses power to keep the memories and clock etc.
the handbook should have told you about different cars having the
permanent
and ignition switched power wires in differnet positions on the iso
connectors.. VW do this mainly, but as VW controll so many cars
nowadays,
skoda, seat, audi and so on will be the same,
|

January 1st 04, 02:30 PM
posted to uk.rec.audio.car
|
|
Whalfedale WCD 712
Hi, just looked at the wire set-up, the red and yellow cable coming from the
stereo match to red and yellow wires going to the car, so is it safe to
change these wires round and have opposite matching colours?
Tim
"www.cel-direct.com" wrote in message
. ..
All being well you should have a red and a yellow cable coming from the
stereo. These are the two cables to be switched (they're usually on
bullets
these days but I can't say for sure on a Whalfdale unit).
Regards
Nick
--
Car Electronics Ltd
www.cel-direct.com
Express Order Line: 0116 244 9845
Pre-sales Advice: 0116 244 9846
Fax: 0116 244 9855
E-mail: nick "at" cel-direct.com
"Tim J" wrote in message
...
Thanks for the reply. I dont have a handbook for the stereo cos I got it
second hand. Where will I find these wires so I can switch them? The car
is
a Vauxhall Cavalier.
Cheers.
"CampinGazz" wrote in message
...
"Tim J" wrote in message
...
Hi,
I have just installed a Whalfedale WCD 712 and set the clock and
radio
stations but it cant seem to remember what I just input, i.e. when I
turn
the engine off and on again the clock goes back to 12:00 and the
preset
radio stations are lost. Anyone have this cd player and know what I
might
be
doing wrong?
Cheers,
Tim
you've not got the power wires the correct way round,
the permanant live is connected to the accessory live position on the
stereo, and vise versa, so when the ignition goes off, all power is
removed
from the stereo, and it looses power to keep the memories and clock
etc.
the handbook should have told you about different cars having the
permanent
and ignition switched power wires in differnet positions on the iso
connectors.. VW do this mainly, but as VW controll so many cars
nowadays,
skoda, seat, audi and so on will be the same,
|

January 1st 04, 05:42 PM
posted to uk.rec.audio.car
|
Banned
|
|
First recorded activity by AudioBanter: Aug 2003
Posts: 18
|
|
Whalfedale WCD 712
Yep should be fine no problems.
Regards
Nick
--
Car Electronics Ltd
www.cel-direct.com
Express Order Line: 0116 244 9845
Pre-sales Advice: 0116 244 9846
Fax: 0116 244 9855
E-mail: nick "at" cel-direct.com
"Tim J" wrote in message
...
Hi, just looked at the wire set-up, the red and yellow cable coming from
the
stereo match to red and yellow wires going to the car, so is it safe to
change these wires round and have opposite matching colours?
Tim
"www.cel-direct.com" wrote in message
. ..
All being well you should have a red and a yellow cable coming from the
stereo. These are the two cables to be switched (they're usually on
bullets
these days but I can't say for sure on a Whalfdale unit).
Regards
Nick
--
Car Electronics Ltd
www.cel-direct.com
Express Order Line: 0116 244 9845
Pre-sales Advice: 0116 244 9846
Fax: 0116 244 9855
E-mail: nick "at" cel-direct.com
"Tim J" wrote in message
...
Thanks for the reply. I dont have a handbook for the stereo cos I got
it
second hand. Where will I find these wires so I can switch them? The
car
is
a Vauxhall Cavalier.
Cheers.
"CampinGazz" wrote in message
...
"Tim J" wrote in message
...
Hi,
I have just installed a Whalfedale WCD 712 and set the clock and
radio
stations but it cant seem to remember what I just input, i.e. when
I
turn
the engine off and on again the clock goes back to 12:00 and the
preset
radio stations are lost. Anyone have this cd player and know what
I
might
be
doing wrong?
Cheers,
Tim
you've not got the power wires the correct way round,
the permanant live is connected to the accessory live position on
the
stereo, and vise versa, so when the ignition goes off, all power is
removed
from the stereo, and it looses power to keep the memories and clock
etc.
the handbook should have told you about different cars having the
permanent
and ignition switched power wires in differnet positions on the iso
connectors.. VW do this mainly, but as VW controll so many cars
nowadays,
skoda, seat, audi and so on will be the same,
|

January 2nd 04, 12:39 PM
posted to uk.rec.audio.car
|
|
Whalfedale WCD 712
I've just tried but I cant get the 2 wires out of their holder. Is there an
easy way?
Tim
"www.cel-direct.com" wrote in message
...
Yep should be fine no problems.
Regards
Nick
--
Car Electronics Ltd
www.cel-direct.com
Express Order Line: 0116 244 9845
Pre-sales Advice: 0116 244 9846
Fax: 0116 244 9855
E-mail: nick "at" cel-direct.com
"Tim J" wrote in message
...
Hi, just looked at the wire set-up, the red and yellow cable coming from
the
stereo match to red and yellow wires going to the car, so is it safe to
change these wires round and have opposite matching colours?
Tim
"www.cel-direct.com" wrote in message
. ..
All being well you should have a red and a yellow cable coming from
the
stereo. These are the two cables to be switched (they're usually on
bullets
these days but I can't say for sure on a Whalfdale unit).
Regards
Nick
--
Car Electronics Ltd
www.cel-direct.com
Express Order Line: 0116 244 9845
Pre-sales Advice: 0116 244 9846
Fax: 0116 244 9855
E-mail: nick "at" cel-direct.com
"Tim J" wrote in message
...
Thanks for the reply. I dont have a handbook for the stereo cos I
got
it
second hand. Where will I find these wires so I can switch them? The
car
is
a Vauxhall Cavalier.
Cheers.
"CampinGazz" wrote in message
...
"Tim J" wrote in message
...
Hi,
I have just installed a Whalfedale WCD 712 and set the clock and
radio
stations but it cant seem to remember what I just input, i.e.
when
I
turn
the engine off and on again the clock goes back to 12:00 and the
preset
radio stations are lost. Anyone have this cd player and know
what
I
might
be
doing wrong?
Cheers,
Tim
you've not got the power wires the correct way round,
the permanant live is connected to the accessory live position on
the
stereo, and vise versa, so when the ignition goes off, all power
is
removed
from the stereo, and it looses power to keep the memories and
clock
etc.
the handbook should have told you about different cars having the
permanent
and ignition switched power wires in differnet positions on the
iso
connectors.. VW do this mainly, but as VW controll so many cars
nowadays,
skoda, seat, audi and so on will be the same,
|
Thread Tools |
|
Display Modes |
Linear Mode
|
|