I had this problem to, was running my Power Cable along side my audio and
power on cable. Moved the power cable
to the other side of my car and i`ts fine now.

"www.cel-direct.com" wrote in message
...
Check your cabling.

It's more than likely you've either got the power cables too close to the
signal cables or alternatively you could have a ground loop situation
where
your amp is trying to earth itself through your headunit. Check your
earthing point is cleaned right back to the bare metal. There are ways to
test if you've got a ground loop but check the cables first then post back
to let us know how that goes.

Regards

Nick
--
Car Electronics Ltd
www.cel-direct.com
Express Order Line: 0116 244 9845
Pre-sales Advice: 0116 244 9846
Fax: 0116 244 9855
E-mail: nick "at" cel-direct.com


"chris scott" wrote in message
...
just bought a 1.9 diesel clio! added a kenwood mini disc head unit and a
10
disc changer! maystar 600 watt amp with splx 12 inch bass box!

everytime i start the car and the stereo comes on the engine noise is
being
amp'd there the speakers ( or should i say just picking up the engine
noise!).

went in to local audio store and the guy reccomended kenwood noise
restrictor which i added! but the noise is still there! its driving me
up
the wall!

any of you guys have any ideas? or the same problem?

thanks for your time
chris