August 22nd 04, 09:13 AM
posted to uk.rec.audio
|
|
|
Wharfedale speakers
"Woody" wrote in message
...
"Triffid" wrote in message
...
James Brownlie pibbled:
Anyone got any idea of quality/ read any reviews on Wharfedale
Denton
speakers. Just found an old pair in my attic.
They started off with Denton 1's which were a little-known single driver
model. Quite sought after on ebay if that's what you've got. They were
square ISTR.
--
Despite appearances, it is still legal to put sugar on cornflakes.
Strawberries are purely optional.
Never was a Denton 1, in fact never an anything 1 from Wharfedale. How
could
you know it would sell and you might develop it to a MK2?
In respect of the single driver I think you are getting mixed up with the
Shilton which was a mite smaller and had a single driver - the Denton
always
had two.
I've got a pair from mid 70's and dug them out recently for a comparison
with a pair of KEF Cresta 10 (I think they are) of mid 80's vintage, and a
pair of Aegis 1 bought late last year but still boxed. I have to admit
that
in a small environment (the kitchen) the Dentons sounded by far the best
with the Aegis the worst. Put them in an 18x12 lounge where they have to
shout a bit and the strain began to show, far more than on the Aegis 1's.
Having said that I think on balance the Dentons were my preference.
--
Woody
Very interesting that you should prefer the single drivers, was it the
sound stage? or a better dynamic range? or a more coherant sound?
You may find this link interesting;
http://fullrangedriver.com/tiki-page...FullrangeIntro
Jem
My humble efforts are here;
http://www.jrbham.btinternet.co.uk/tqwp/
|
August 22nd 04, 02:46 PM
posted to uk.rec.audio
|
|
|
Wharfedale speakers
"Jem Raid" wrote in message
...
"Woody" wrote in message
...
"Triffid" wrote in message
...
James Brownlie pibbled:
Anyone got any idea of quality/ read any reviews on Wharfedale
Denton
speakers. Just found an old pair in my attic.
They started off with Denton 1's which were a little-known single
driver
model. Quite sought after on ebay if that's what you've got. They
were
square ISTR.
--
Despite appearances, it is still legal to put sugar on cornflakes.
Strawberries are purely optional.
Never was a Denton 1, in fact never an anything 1 from Wharfedale. How
could
you know it would sell and you might develop it to a MK2?
In respect of the single driver I think you are getting mixed up with
the
Shilton which was a mite smaller and had a single driver - the Denton
always
had two.
I've got a pair from mid 70's and dug them out recently for a comparison
with a pair of KEF Cresta 10 (I think they are) of mid 80's vintage, and
a
pair of Aegis 1 bought late last year but still boxed. I have to admit
that
in a small environment (the kitchen) the Dentons sounded by far the best
with the Aegis the worst. Put them in an 18x12 lounge where they have to
shout a bit and the strain began to show, far more than on the Aegis
1's.
Having said that I think on balance the Dentons were my preference.
--
Woody
Very interesting that you should prefer the single drivers, was it the
sound stage? or a better dynamic range? or a more coherant sound?
You may find this link interesting;
http://fullrangedriver.com/tiki-page...FullrangeIntro
Jem
My humble efforts are here;
http://www.jrbham.btinternet.co.uk/tqwp/
Not knowing who you are aiming the comment at, note that as I said in my
response, the Denton always was a two-way unit - it was the Shelton (not
Shilton as I said earlier) that was a single driver and I (thankfully) never
had any of them!.
Unlike most modern speakers both the Shelton and the Denton were infinite
baffle (i.e. sealed box) designs.
--
Woody
|
August 22nd 04, 03:16 PM
posted to uk.rec.audio
|
|
|
Wharfedale speakers
"Woody" wrote in message
...
"Jem Raid" wrote in message
...
"Woody" wrote in message
...
"Triffid" wrote in message
...
James Brownlie pibbled:
Anyone got any idea of quality/ read any reviews on Wharfedale
Denton
speakers. Just found an old pair in my attic.
They started off with Denton 1's which were a little-known single
driver
model. Quite sought after on ebay if that's what you've got. They
were
square ISTR.
--
Despite appearances, it is still legal to put sugar on cornflakes.
Strawberries are purely optional.
Never was a Denton 1, in fact never an anything 1 from Wharfedale. How
could
you know it would sell and you might develop it to a MK2?
In respect of the single driver I think you are getting mixed up with
the
Shilton which was a mite smaller and had a single driver - the Denton
always
had two.
I've got a pair from mid 70's and dug them out recently for a
comparison
with a pair of KEF Cresta 10 (I think they are) of mid 80's vintage,
and
a
pair of Aegis 1 bought late last year but still boxed. I have to admit
that
in a small environment (the kitchen) the Dentons sounded by far the
best
with the Aegis the worst. Put them in an 18x12 lounge where they have
to
shout a bit and the strain began to show, far more than on the Aegis
1's.
Having said that I think on balance the Dentons were my preference.
--
Woody
Very interesting that you should prefer the single drivers, was it the
sound stage? or a better dynamic range? or a more coherant sound?
You may find this link interesting;
http://fullrangedriver.com/tiki-page...FullrangeIntro
Jem
My humble efforts are here;
http://www.jrbham.btinternet.co.uk/tqwp/
Not knowing who you are aiming the comment at, note that as I said in my
response, the Denton always was a two-way unit - it was the Shelton (not
Shilton as I said earlier) that was a single driver and I (thankfully)
never
had any of them!.
Unlike most modern speakers both the Shelton and the Denton were infinite
baffle (i.e. sealed box) designs.
--
Woody
Sorry Woody it was Triffid I was aiming the comment at, but I'd like to know
anyone's feeling about simgle drivers.
Jem
|
August 27th 04, 06:27 AM
posted to uk.rec.audio
|
|
|
Wharfedale speakers
"Jim Lesurf" wrote in message
...
In article , Jem Raid
wrote:
Sorry Woody it was Triffid I was aiming the comment at, but I'd like to
know anyone's feeling about simgle drivers.
Well, my preferred speakers are Quad ESL63's and 988's. I'll leave it to
you to decide if these can be called 'single driver' or not, though...
:-)
Slainte,
Jim
--
Electronics
http://www.st-and.ac.uk/~www_pa/Scot...o/electron.htm
Audio Misc http://www.st-and.demon.co.uk/AudioMisc/index.html
Armstrong Audio http://www.st-and.demon.co.uk/Audio/armstrong.html
Barbirolli Soc. http://www.st-and.demon.co.uk/JBSoc/JBSoc.html
I guess they can Jim :-)
I have heard some albeit a long time ago at a HiFi show near Heathrow,
personally I liked the Lowthers I heard there and made a pair of Mini
Acousta's, we had a largish house at the time. Over the years I have become
used to a sound stage at ear'ole height and the tall but narrow TQWP's fit
the bill perfectly.
Jem
|
August 27th 04, 09:25 AM
posted to uk.rec.audio
|
|
|
Wharfedale speakers
"Jem Raid" wrote in message
...
"Woody" wrote in message
...
"Jem Raid" wrote in message
...
"Woody" wrote in message
...
"Triffid" wrote in message
...
James Brownlie pibbled:
Anyone got any idea of quality/ read any reviews on
Wharfedale
Denton
speakers. Just found an old pair in my attic.
They started off with Denton 1's which were a little-known single
driver
model. Quite sought after on ebay if that's what you've got.
They
were
square ISTR.
--
Despite appearances, it is still legal to put sugar on
cornflakes.
Strawberries are purely optional.
Never was a Denton 1, in fact never an anything 1 from Wharfedale.
How
could
you know it would sell and you might develop it to a MK2?
In respect of the single driver I think you are getting mixed up
with
the
Shilton which was a mite smaller and had a single driver - the
Denton
always
had two.
I've got a pair from mid 70's and dug them out recently for a
comparison
with a pair of KEF Cresta 10 (I think they are) of mid 80's
vintage,
and
a
pair of Aegis 1 bought late last year but still boxed. I have to
admit
that
in a small environment (the kitchen) the Dentons sounded by far the
best
with the Aegis the worst. Put them in an 18x12 lounge where they
have
to
shout a bit and the strain began to show, far more than on the Aegi
s
1's.
Having said that I think on balance the Dentons were my preference.
--
Woody
Very interesting that you should prefer the single drivers, was it
the
sound stage? or a better dynamic range? or a more coherant sound?
You may find this link interesting;
http://fullrangedriver.com/tiki-page...FullrangeIntro
Jem
My humble efforts are here;
http://www.jrbham.btinternet.co.uk/tqwp/
Not knowing who you are aiming the comment at, note that as I said in
my
response, the Denton always was a two-way unit - it was the Shelton
(not
Shilton as I said earlier) that was a single driver and I (thankfully)
never
had any of them!.
Unlike most modern speakers both the Shelton and the Denton were
infinite
baffle (i.e. sealed box) designs.
--
Woody
Sorry Woody it was Triffid I was aiming the comment at, but I'd like to
know
anyone's feeling about simgle drivers.
Jem
I have a pair of ESL 57's in the main listening room and
Lowther Acoustas with new EX2's in the office. Various
other crossover speakers, including old Tannoys don't
get a look in these days. I'm thinking of fitting the Tannoy
drivers into an old pair of Lowther Acoustas cabinets that
are hanging around. That could be interesting.
Alan
|
August 22nd 04, 03:23 PM
posted to uk.rec.audio
|
|
|
Wharfedale speakers
In article , Woody
wrote:
Unlike most modern speakers both the Shelton and the Denton were
infinite baffle (i.e. sealed box) designs.
Although one 'feature' of the version of the Denton available in the late
1960's was that the rear wall of the cabinet was made of a relatively thin
layer of wood, and hence was somewhat more flexible than the front and
sides. This may have had effect upon the speaker and made it less of an
infinite baffle than is common.
There were various speakers back in the 1950's and early 60's that
deliberately used 'flimsy' panels to fiddle about with the resonances, etc.
This seems to have died out as an idea, though no doubt someone will
re-invent it in due course as a major new advance. :-)
Slainte,
Jim
--
Electronics http://www.st-and.ac.uk/~www_pa/Scot...o/electron.htm
Audio Misc http://www.st-and.demon.co.uk/AudioMisc/index.html
Armstrong Audio http://www.st-and.demon.co.uk/Audio/armstrong.html
Barbirolli Soc. http://www.st-and.demon.co.uk/JBSoc/JBSoc.html
|
August 23rd 04, 12:32 PM
posted to uk.rec.audio
|
|
|
Wharfedale speakers
In article ,
Jim Lesurf wrote:
There were various speakers back in the 1950's and early 60's that
deliberately used 'flimsy' panels to fiddle about with the resonances,
etc. This seems to have died out as an idea, though no doubt someone
will re-invent it in due course as a major new advance. :-)
Wasn't the first to do this accurately the BC1? On the principle that you
can't make a perfectly resonance free cabinet speaker, so use CAD to
assess those resonances and make them work for you?
--
*When companies ship Styrofoam, what do they pack it in? *
Dave Plowman London SW
To e-mail, change noise into sound.
|
| Thread Tools |
|
|
| Display Modes |
 Hybrid Mode
|
|
