Big Sub
 

On Tue, 12 Oct 2004 14:35:41 +0100, "Mike Gilmour"
wrote:


"Keith G" wrote in message
...

"Stewart Pinkerton" wrote in message
...
On Sun, 10 Oct 2004 11:46:01 +0100, "Keith G"
wrote:


"Stewart Pinkerton" wrote in message
m...
On Fri, 8 Oct 2004 12:55:59 +0100, "Keith G"
wrote:

Steady on! You'll be building that SET next......!! ;-)

I have never had *any* intention of building a SET amplifier!


Well, there you go - I could have sworn I saw you post 'you were tempted
to
build one yourself' at some point???

(I must be losing it....... ;-)

You probably are - but what I said was that I was considering
designing and building a triode amp. I most certainly did *not* say a
single-ended amp, since they're fundamentally incompetent, and my
point was that it should be possible to build a *good* amp, even when
technically challenged by using valves........


Well, come on then - cut the cackle and get stuck in! Do what new Geoff
says and 'have some fun'! (Who knows, if you build it it, you might even
like it!! ;-)

In any case, you should be able to make a few ackers on it if you didn't
want to keep it - who here could resist a 'Pinky Special'?? Feck, you
could even spray it pink and get a real 'rosy glow'....!! :-)


Purely Purist Pinketons's Pink Project Proposal? :-)

Nah - Pink Power for Pukka Purists!
--

Stewart Pinkerton | Music is Art - Audio is Engineering

Big Sub
 

On Tue, 12 Oct 2004 18:39:52 +0100, Chris Morriss
wrote:

In message , Stewart
Pinkerton writes
Properly designed SET amp = military intelligence.............

I mean one where the 'designer' gave at least a cursory look at the
anode curves to work out the optimum load impedance and dc biasing
point!

Thereby bringing the highest possible smoothness of surface finish to
this smelly turd.....................
--

Stewart Pinkerton | Music is Art - Audio is Engineering