A Audio, hi-fi and car audio  forum. Audio Banter

Go Back   Home » Audio Banter forum » UK Audio Newsgroups » uk.rec.audio (General Audio and Hi-Fi)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.rec.audio (General Audio and Hi-Fi) (uk.rec.audio) Discussion and exchange of hi-fi audio equipment.

Speaker cable termination choice



 
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old November 26th 04, 11:00 AM posted to uk.rec.audio
Mike Gilmour
external usenet poster
 
Posts: 620
Default Speaker cable termination choice


"JustMe" wrote in message
...
"Mike Gilmour" wrote in message
...

"Don Pearce" wrote in message
...
On Fri, 26 Nov 2004 09:11:43 +0000, Ronnie Davis
wrote:

Hi,

Looking to replace my bi-wired speaker cable terminations. My local

hi-fi
dealer is selling banana plugs at £1.50 which are the ones which don't
need
soldering.

Does anyone know where I purchase these online cheaper?

Are they as easy to fit as the dealer says?

Also, what are the best type of terminations ... spade or banana?

Many thanks,

Ronnie.

Maplin have them t 49p. Spades are possibly very slightly better when
they are really tight, but because of their geometry, they do tend to
loosen when cables move - particularly heavy cables such as you use
for speakers.

I use banana plugs very successfully.

You can always tighten the binding post down on to the bare end of the
cable. This works well, but beware of loose strands shorting. Don't
twist the strands together when you do this - let them flatten out
under the pressure.

d
Pearce Consulting
http://www.pearce.uk.com



When you've tightened down a bare cable to a binding post wait a few
hours
then retighten - you'll always get a bit more clamping power without
overtightening the connection. The same applies to 'choc bloc' terminal
strips - when they are fully tight, wait - then tighten again. (The

clamped
cable does relax over a short time).
Being involved in marine installations over many years where constant

cycles
of heat/cold and constant vibration are the norm then such procedure is
necessary for long term connection reliability Hopefully your hifi

doesn't
endure quite those environmental conditions :-)

Mike


HI-FIs FROM HELL - true stories of hifi in the harshest environments known
to Man - 8 x 60mins, ITV4, from February 2005.

Themes include:
Vibration damping on the San Andreas fault
Stereo imaging in the Pacific
Class A amps in a metal bunker in the Sahara
Calibrating Eroica tracking force on Jupiter
Setting LP12 suspension in zero gravity
Reducing jitter on The Sun
Open-back headphones in a Hurricane
Subwoofers on a snowy Spring slope, in the Alps
Rhythm and timing at a "Busted" concert



Hey nice one...

EXTREME HI-FI

Using vinyl on the San Andreas fault :-)
Imaging problems inside tanks (Iraq)
Class A heating problems in the Red Sea
Tone arm bearing viscosity problems at the north pole
Reducing Swiss alps echo smearing
Sun spots and your tuner
Subwoofer & chaos theory
War and peace in UKRA



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 08:30 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.SEO by vBSEO 3.0.0
Copyright ©2004-2025 Audio Banter.
The comments are property of their posters.