Following on from some discussions in other threads I couldn't find any
existing data on the resistance-current properties of fuses, so did a quick
measurement as a simple experiment.

The results are shown on the graph at

http://www.st-and.demon.co.uk/temp/fuseplot.gif

Note that this is fairly rought data and I only chose one 0.5A fuse for
test purposes. Other individual types and values of fuse can be expected to
differ in detail. However the results do show the tendency for the fuse
resistance to rise with current. Only used an AVO and a cheap DVM so the
lower current values are subject to random reading errors producing a
scatter of points.

For these measurements I only applied the current for a few seconds for
each reading. To get to higher currents I would probably need to do pulsed
measurements. These would also be needed to look at the details of the
time-dependent behaviour when the current level varies.

Although I fitted a parabola for illustrative purposes, I doubt that is the
correct function for making reliable predictions, particarly for fuses of
values that differ a lot from 0.5A. So the results are perhaps
'interesting' rather than particularly significant.

Slainte,

Jim

--
Electronics http://www.st-and.ac.uk/~www_pa/Scot...o/electron.htm
Audio Misc http://www.st-and.demon.co.uk/AudioMisc/index.html
Armstrong Audio http://www.st-and.demon.co.uk/Audio/armstrong.html
Barbirolli Soc. http://www.st-and.demon.co.uk/JBSoc/JBSoc.html