"Don Pearce" wrote in message
...
On Thu, 1 Jun 2006 17:38:45 +0100, "Keith G"
wrote:

It doesn't matter how the cable is connected to the driver - personally, I
can't be arsed with spades, I solder 'em and then I know they're
*connected*....

I'm with you on that. But the first question still hangs there - why
is that big red wire going in through the side rather than the back
(not the black speaker)?



I already tole you - how TF could you run it through this lot:

http://www.apah69.dsl.pipex.com/show/jerichos.JPG

(the top is the far end in the pic) and be able to pull it after the cabinet
is built and sealed? (Forget tacking 'pull throughs' onto it - let's keep it
real!)

Terminal blocks/trays on these muthas just ain't done, believe me! - If I
had only the one (valve) amp on the go, I would run the wires right into it
and hook it directly to the trannies!!

Besides, it's a *horn* thing....

:-)