treefroginometry wrote:
"treefroginometry" wrote in message
...

Hi group,

I recently bought myself a Creative Audigy Platinum eX, I currently have

it

connected to my amp (Technics SA-DX940) via the "Front L/R" output on the
card using a jack to RCA converter cable.
The cable is very old and and poor quality.

So, the problem... Obviously both amp and soundcard support DTS, using the
current setup I can't get a 5.1 channel signal from soundcard to amp. I

need

a way to do this. The external Audigy box has an optical output, but due

to

the amount of bending and length required to get to the amp, I can't use

it.

The Audigy also has a digital (coaxial?) output (looks like a female jack
plug), the trouble is, the amp doesn't appear to have an input for it,

that

would've been ideal.

Can anybody think of a way to connect these two devices that would allow

the

DTS signal or is it time to buy a new amp?

If it's new amp time (which I would really like to avoid), are there any
recomendations? I just need a DTS decoder and amplifier for 5 channels. I
wont bother with tuner and video in/out features of the Technics next

time,

they don't get used.

Thanks very much,

Nathan




Sorry, I've just realised I'm as blind as a bat.

I've just spotted the Front R/L, Rear R/L and Sub/center/rear center output
jacks on the soundcard (I thought they were mic/line-in)

So, a change of question. Does anybody know where I can get reasonably good
quality jack to RCA leads from, preferably in the UK?

Thanks,

Nathan



I used Qunex J2P from www.bestpricetv.com


--
Nick H (UK)

"Nick H (UK)" wrote in message
...
treefroginometry wrote:
"treefroginometry" wrote in message
...

Hi group,

I recently bought myself a Creative Audigy Platinum eX, I currently have

it

connected to my amp (Technics SA-DX940) via the "Front L/R" output on
the
card using a jack to RCA converter cable.
The cable is very old and and poor quality.

So, the problem... Obviously both amp and soundcard support DTS, using
the
current setup I can't get a 5.1 channel signal from soundcard to amp. I

need

a way to do this. The external Audigy box has an optical output, but due

to

the amount of bending and length required to get to the amp, I can't use

it.

The Audigy also has a digital (coaxial?) output (looks like a female
jack
plug), the trouble is, the amp doesn't appear to have an input for it,

that

would've been ideal.

Can anybody think of a way to connect these two devices that would allow

the

DTS signal or is it time to buy a new amp?

If it's new amp time (which I would really like to avoid), are there any
recomendations? I just need a DTS decoder and amplifier for 5 channels.
I
wont bother with tuner and video in/out features of the Technics next

time,

they don't get used.

Thanks very much,

Nathan




Sorry, I've just realised I'm as blind as a bat.

I've just spotted the Front R/L, Rear R/L and Sub/center/rear center
output
jacks on the soundcard (I thought they were mic/line-in)

So, a change of question. Does anybody know where I can get reasonably
good
quality jack to RCA leads from, preferably in the UK?

Thanks,

Nathan



I used Qunex J2P from www.bestpricetv.com


--
Nick H (UK)


Thanks Nick, I've just placed an order.

"Nick H (UK)" wrote in message
...
treefroginometry wrote:
"treefroginometry" wrote in message
...

Hi group,

I recently bought myself a Creative Audigy Platinum eX, I currently have

it

connected to my amp (Technics SA-DX940) via the "Front L/R" output on
the
card using a jack to RCA converter cable.
The cable is very old and and poor quality.

So, the problem... Obviously both amp and soundcard support DTS, using
the
current setup I can't get a 5.1 channel signal from soundcard to amp. I

need

a way to do this. The external Audigy box has an optical output, but due

to

the amount of bending and length required to get to the amp, I can't use

it.

The Audigy also has a digital (coaxial?) output (looks like a female
jack
plug), the trouble is, the amp doesn't appear to have an input for it,

that

would've been ideal.

Can anybody think of a way to connect these two devices that would allow

the

DTS signal or is it time to buy a new amp?

If it's new amp time (which I would really like to avoid), are there any
recomendations? I just need a DTS decoder and amplifier for 5 channels.
I
wont bother with tuner and video in/out features of the Technics next

time,

they don't get used.

Thanks very much,

Nathan




Sorry, I've just realised I'm as blind as a bat.

I've just spotted the Front R/L, Rear R/L and Sub/center/rear center
output
jacks on the soundcard (I thought they were mic/line-in)

So, a change of question. Does anybody know where I can get reasonably
good
quality jack to RCA leads from, preferably in the UK?

Thanks,

Nathan



I used Qunex J2P from www.bestpricetv.com


--
Nick H (UK)


Thanks Nick, I've just placed an order.