![]() |
AKG C451 mics
On Sun, 31 May 2009 17:34:31 +0100, Chris Isbell
wrote: On Sun, 31 May 2009 13:22:33 +0100, tony sayer wrote: Indeed it is .. we once used around three miles of phone cable overhead and underground for an RSL and apart from a bit of "top" loss its was very quiet indeed;).. I was once told that the cables on telephone posts are arranged to form a twisted pair. (I.e. the cables move from insulator to insulator so that they twist around each other.) Pardon my ignorance, but what is an RSL? I presume he's talking about a Restricted Service License. This would be something like a special temporary FM transmitter serving an event (the British Grand Prix will certainly have one next month). It would need a signal feed from a studio somewhere. d |
AKG C451 mics
Don Pearce wrote..
That's probably when I last heard it! In fact not since I last used valves and suffered from a rectifying contact in the socket. All you'd hear today is a short databurst. http://www.cabmaster.com/ -- Ken http://unsteadyken.sitegoz.com/ |
AKG C451 mics
In article , UnsteadyKen
scribeth thus Don Pearce wrote.. That's probably when I last heard it! In fact not since I last used valves and suffered from a rectifying contact in the socket. All you'd hear today is a short databurst. http://www.cabmaster.com/ You'd be very lucky to hear that or would have to be in the taxi!.. Despite all the GPRS data they still use the voice radio to sort out all the things that data messaging can't!.. -- Tony Sayer |
AKG C451 mics
In article , TonyL
scribeth thus Dave Plowman (News) wrote: You'd be surprised. Some time ago I made up 100v line XLR cables using ordinary mains 2 core flex. Cheaper than screened cable. And found one in use with a dynamic hand mic - because it was a nice shiny white, rather than the more usual mic cable grey or black. And apparently worked just fine. In other words it's the balancing that gives the majority of the rejection of spurious stuff. I'm told that Cat 5 Ethernet cable also works great for audio if you need several channels, presumably because the pairs are tightly twisted. The other advantage is that it is relatively cheap. Yes it does its also very good for ordinary phone comms.. -- Tony Sayer |
AKG C451 mics
"Chris Isbell" wrote in message ... On Sun, 31 May 2009 13:22:33 +0100, tony sayer wrote: Indeed it is .. we once used around three miles of phone cable overhead and underground for an RSL and apart from a bit of "top" loss its was very quiet indeed;).. I was once told that the cables on telephone posts are arranged to form a twisted pair. (I.e. the cables move from insulator to insulator so that they twist around each other.) Open -wires were arranged that way. Two pairs on 4 insulators were rotated 90 degrees every so often forming a quad. But therse all went out of use years ago, in overhead cables the pairs are twisted inside the cable. David. |
All times are GMT. The time now is 06:48 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.0.0
Copyright ©2004-2006 AudioBanter.co.uk