Convert speaker spikes from quadrupod to tripod
 

On 21 Aug, 11:32, James Harris wrote:

My speakers have four spikes beneath them which makes it a pain to
move the speakers even slightly as the length of at least one spike
has to be adjusted to make all four rest on/in the floor. (The floor
is solid - maybe concrete - and not wood.)


Anyone heard of a kit to convert four spikes to three? It would have
to fit beneath the existing arrangement as I don't want to modify the
speakers (which are Dynaudio Audience 62 floorstanders).


I'm thinking of something like a heavy duty plate with four solid
fittings above and three below. I suppose an alteration to the sound
is inevitable but would avoid scrap the idea if it has too much
effect.


An alternative is to put paving slabs on top of the carpet beneath the
speakers. They should be heavy enough to not move and also present a
more uniform surface for the speakers though even that would not be
perfect. The slight problem here is the slabs sold by the local stores
are fairly lightweight.


Any ideas?

Widening the net a little....

James

Convert speaker spikes from quadrupod to tripod
 

In article
,
James
Harris wrote:
On 21 Aug, 11:32, James Harris wrote:

My speakers have four spikes beneath them which makes it a pain to
move the speakers even slightly as the length of at least one spike
has to be adjusted to make all four rest on/in the floor. (The floor
is solid - maybe concrete - and not wood.)

I'd agree that three spikes are rather more practical than four. But afraid
I don't know of any kits for the below.

I'm thinking of something like a heavy duty plate with four solid
fittings above and three below. I suppose an alteration to the sound
is inevitable but would avoid scrap the idea if it has too much effect.


An alternative is to put paving slabs on top of the carpet beneath the
speakers. They should be heavy enough to not move and also present a
more uniform surface for the speakers though even that would not be
perfect. The slight problem here is the slabs sold by the local stores
are fairly lightweight.

TBH I have my doubts about such 'slabs' under 'spikes' being of much use.
Have a look at http://www.audiomisc.co.uk/cones/speak.html to see why I
have doubts about that. You might be better with a layer of something
squidgy like 'Blu Tak' between speaker and a heavy slab. Or just don't
bother. I've missed the previous parts of the thread is this is the first
posting on this thread I've seen, so I wonder why you think the 'spikes'
are desirable at all...


Any ideas?

Widening the net a little....

Open the window wider and.... :-)

Slainte,

Jim

--
Electronics http://www.st-and.ac.uk/~www_pa/Scot...o/electron.htm
Armstrong Audio http://www.audiomisc.co.uk/Armstrong/armstrong.html
Audio Misc http://www.audiomisc.co.uk/index.html

Convert speaker spikes from quadrupod to tripod
 

On Mon, 24 Aug 2009 01:34:32 -0700 (PDT), James Harris
wrote:

My speakers have four spikes beneath them which makes it a pain to
move the speakers even slightly as the length of at least one spike
has to be adjusted to make all four rest on/in the floor. (The floor
is solid - maybe concrete - and not wood.)


Anyone heard of a kit to convert four spikes to three? It would have
to fit beneath the existing arrangement as I don't want to modify the
speakers (which are Dynaudio Audience 62 floorstanders).

I don't understand spikes. Audiophiles talk about coupling and
arrange heavy lumps of stone to couple to. But then they minimise
that coupling by restricting it to three or four points!

Perhaps the spikes are merely so you CAN adjust the speaker to stand
level on a concrete floor?

My practical experience of large speakers - some much larger than
anything found in a domestic setup - is that they generally sound MUCH
better mounted at least a small distance away from any flat surface,
wall or floor.

Convert speaker spikes from quadrupod to tripod
 

James Harris wrote:

My speakers have four spikes beneath them which makes it a pain to
move the speakers even slightly as the length of at least one spike
has to be adjusted to make all four rest on/in the floor. (The floor
is solid - maybe concrete - and not wood.)

Why do you want to move them around so much? Take the spikes off, experiment
with positioning the speakers for a week or two. When you're satisfied they're
optimally placed, put the spikes back on and leave them on and be done with it.

Convert speaker spikes from quadrupod to tripod
 

I think the reason for four was health and safety actually, harder to wobble
them over.


Brian

--
Brian Gaff....Note, this account does not accept Bcc: email.
graphics are great, but the blind can't hear them
Email:
__________________________________________________ __________________________________________________ __________


"James Harris" wrote in message
...
On 21 Aug, 11:32, James Harris wrote:

My speakers have four spikes beneath them which makes it a pain to
move the speakers even slightly as the length of at least one spike
has to be adjusted to make all four rest on/in the floor. (The floor
is solid - maybe concrete - and not wood.)


Anyone heard of a kit to convert four spikes to three? It would have
to fit beneath the existing arrangement as I don't want to modify the
speakers (which are Dynaudio Audience 62 floorstanders).


I'm thinking of something like a heavy duty plate with four solid
fittings above and three below. I suppose an alteration to the sound
is inevitable but would avoid scrap the idea if it has too much
effect.


An alternative is to put paving slabs on top of the carpet beneath the
speakers. They should be heavy enough to not move and also present a
more uniform surface for the speakers though even that would not be
perfect. The slight problem here is the slabs sold by the local stores
are fairly lightweight.


Any ideas?

Widening the net a little....

James

Convert speaker spikes from quadrupod to tripod
 

On Mon, 24 Aug 2009 11:15:21 GMT, "Brian Gaff"
wrote:

I think the reason for four was health and safety actually, harder to wobble
them over.

By audiophile reasoning, would just ONE spike, perfectly balanced, be
the ideal? :-)

Convert speaker spikes from quadrupod to tripod
 

"Brian Gaff" wrote in message
om...
I think the reason for four was health and safety actually, harder to
wobble them over.


Wobbling over has nothing to do with the number of points of support but is
to do with the geometric relationship between the various points of support
and the speaker's centre of mass/gravity/momentum - pick whichever takes yer
fancy....

Convert speaker spikes from quadrupod to tripod
 

"Laurence Payne" wrote in message
...
On Mon, 24 Aug 2009 11:15:21 GMT, "Brian Gaff"
wrote:

I think the reason for four was health and safety actually, harder to
wobble
them over.

By audiophile reasoning, would just ONE spike, perfectly balanced, be
the ideal? :-)



What do you mean by 'audiophile'...???

Convert speaker spikes from quadrupod to tripod
 

"James Harris" wrote in message
...
On 21 Aug, 11:32, James Harris wrote:

My speakers have four spikes beneath them which makes it a pain to
move the speakers even slightly as the length of at least one spike
has to be adjusted to make all four rest on/in the floor. (The floor
is solid - maybe concrete - and not wood.)


Anyone heard of a kit to convert four spikes to three? It would have
to fit beneath the existing arrangement as I don't want to modify the
speakers (which are Dynaudio Audience 62 floorstanders).


I'm thinking of something like a heavy duty plate with four solid
fittings above and three below. I suppose an alteration to the sound
is inevitable but would avoid scrap the idea if it has too much
effect.


An alternative is to put paving slabs on top of the carpet beneath the
speakers. They should be heavy enough to not move and also present a
more uniform surface for the speakers though even that would not be
perfect. The slight problem here is the slabs sold by the local stores
are fairly lightweight.


Any ideas?

Widening the net a little....

James



IIRC, WW Greener's formula was that the projectile to be fired from a rifle
should not exceed that of 1/96th of the rifle's total weight (mass?) -
whether a speaker would need coupling to a firm foundation would depend upon
its overall weight (mass?) I suspect....

Convert speaker spikes from quadrupod to tripod
 

Laurence Payne wrote:
On Mon, 24 Aug 2009 11:15:21 GMT, "Brian Gaff"
wrote:

I think the reason for four was health and safety actually, harder to wobble
them over.

By audiophile reasoning, would just ONE spike, perfectly balanced, be
the ideal? :-)

O yes, it has to be gold plated, have directionality marks for gravity,
cosmic and magnetic influence, machined to 1 thou of nothing, made in a
total vacuum - and have an impressive price. Probably needs degaussing
regulary ...

--
Adrian C