In article ,
Adrian C wrote:
Right - I think those are known as Equipment outlets. I have one on a
Yamaha amp. Sort of pre-dates IEC connectors, in Japan at least. Had the
very devil of a job finding a plug for one years ago - and could only find
a two pin. The easiest answer might be to change those outlets for IEC
ones.


Nope, it's to the left of that (It's not the mains connector).

Sorry - so out of focus here I can't make them out. I'll need to send them
to CSI. ;-)

That's not a bad Samsumg camera (ES55?), but looks like the photographer
is broken.

er, opps... ;-)

Whatever. ;-)

--
*Don't squat with your spurs on *

Dave Plowman London SW
To e-mail, change noise into sound.

On 17/02/2012 11:25, the_constructor wrote:
I have been given a Kenwood Hi-Fi system. Yes it is old and yes it does
work, well partly anyway. Amp with CD player

These are the parts included:
All Kenwood
T-85L Tuner
DP-950 CD player
GE-850 Graphic equaliser
A-85 Amplifier

I have been informed by a chap on eBay that I need a special cable to link
the Tuner and the Graphic Equaliser to the amplifier. Apparently the amp
sends control cables to the other parts in order to switch them on etc.

I was wondering if, long shot I know, if anyone knew anything about this
system and if they could give any further info on the cables so that I could
possibly make some if I can find the components required.


Found a service manual here, it's $4.99

http://www.kenwood.owner-manuals.com...l-KENWOOD.html

From that you'll find part numbers for the cable, though if it was me
I'd be hacking inside, tracing the connections back (to acertain which
is data and ground, and that they connect like that both ends)
unsoldering the sockets and substituting with something cheap like
minature molex (commonly used for PC interconnects).

But that's me

--
Adrian C

In message ,
the_constructor writes


The camera was repaired by an idiot who is supposed to know about such
things, and I have never been happy with it since, so looks as that will go
on recycle soon.

Why not just post the photos I sent you today?


--
geoff

"Adrian C" wrote in message
...
On 17/02/2012 11:25, the_constructor wrote:
I have been given a Kenwood Hi-Fi system. Yes it is old and yes it does
work, well partly anyway. Amp with CD player

These are the parts included:
All Kenwood
T-85L Tuner
DP-950 CD player
GE-850 Graphic equaliser
A-85 Amplifier

I have been informed by a chap on eBay that I need a special cable to
link
the Tuner and the Graphic Equaliser to the amplifier. Apparently the amp
sends control cables to the other parts in order to switch them on etc.

I was wondering if, long shot I know, if anyone knew anything about this
system and if they could give any further info on the cables so that I
could
possibly make some if I can find the components required.


Found a service manual here, it's $4.99

http://www.kenwood.owner-manuals.com...l-KENWOOD.html

From that you'll find part numbers for the cable, though if it was me I'd
be hacking inside, tracing the connections back (to acertain which is data
and ground, and that they connect like that both ends) unsoldering the
sockets and substituting with something cheap like minature molex
(commonly used for PC interconnects).

But that's me

--
Adrian C



Although I haven't got a circuit diagram yet of the manual, some kind person
donated to me the leads that I have been looking for as a result of me
asking for help on these 2 groups.
I am truly grateful for your assistance and all the information and help
from others
Jim G