
November 29th 17, 07:55 AM
posted to uk.rec.audio
|
|
Running an amplifier unearthed
If you read uk.d-i-y, you may have seen a thread ("This appliance must
be earthed") about Dutch mains sockets, which are often unearthed.
If I plug a Cyrus 1 amplifier (which has an extremely metal case and a
stern label saying "This appliance must be earthed") into an unearthed
socket, do I risk death by electrocution, or worse, poorer sound
quality?
Daniele
|

November 29th 17, 08:26 AM
posted to uk.rec.audio
|
|
Running an amplifier unearthed
Well, it depends on what else you have connected to it I suppose. You would
need to find out in this case why it says it has to be earthed, If its just
hum and buzz and pick up of rubbish then its safe but if it has large
capacitors between the earth and live etc, then you will get quite a belt.
I guess that if they are specifying an earth they probably have a reason
for running it that way, but I doubt if its going to be in danger of the
mains shorting to the earth, that would be silly. Its mainly appliances
which may be in the vicinity of water or which have components that might
fail like powerful motors that need an earth. Fridges Washing machines,
Vacuums etc.
I never did quite get why garden equipment has no earth though.
Brian
--
----- -
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...
Blind user, so no pictures please!
"D.M. Procida" wrote in
message
...
If you read uk.d-i-y, you may have seen a thread ("This appliance must
be earthed") about Dutch mains sockets, which are often unearthed.
If I plug a Cyrus 1 amplifier (which has an extremely metal case and a
stern label saying "This appliance must be earthed") into an unearthed
socket, do I risk death by electrocution, or worse, poorer sound
quality?
Daniele
|

November 29th 17, 10:50 AM
posted to uk.rec.audio
|
|
Running an amplifier unearthed
Woody wrote:
---------------
In fact you will find that most amplifiers with a fixed cable use two
core and no earth, as do almost all other separates.
** But ONLY if they are built to Class 2 standard as indicated by the famous double square symbol on the back.
All the rest with 3 core cable and standard 3 pin IEC inlets require a safety ground.
In practice if there is to be an earth within a hi-fi system there
should only ever be one and very often that used to be on the
turntable.
** Never the TT, that is plain insane.
A power amp or integrated amp is the wise choice and the TT ground lead connected to the pre-amp or integrated amps chassis.
An all class 2 system that includes a TT invariably hums - till you add a safety earth somewhere.
..... Phil
|

November 29th 17, 12:12 PM
posted to uk.rec.audio
|
|
Running an amplifier unearthed
In article ,
Woody wrote:
In practice if there is to be an earth within a hi-fi system there
should only ever be one and very often that used to be on the
turntable. If there is more than one you will likely end up with a
'hum loop' around the multiple earths causing a very low level but
continuous hum form the speakers.
I've never ever seen a system where the mains earth is provided via the
turntable. Most usually by the device where the mains is switched from
like the amp or pre-amp, if that supplies switched mains for other things.
Signal ground is a different matter.
--
*A conclusion is the place where you got tired of thinking *
Dave Plowman London SW
To e-mail, change noise into sound.
|

November 29th 17, 12:31 PM
posted to uk.rec.audio
|
|
Running an amplifier unearthed
"Dave Plowman (News)" wrote in message
...
In article ,
Woody wrote:
In practice if there is to be an earth within a hi-fi system there
should only ever be one and very often that used to be on the
turntable. If there is more than one you will likely end up with a
'hum loop' around the multiple earths causing a very low level but
continuous hum form the speakers.
I've never ever seen a system where the mains earth is provided via
the
turntable. Most usually by the device where the mains is switched
from
like the amp or pre-amp, if that supplies switched mains for other
things.
Signal ground is a different matter.
Although it is getting on a bit my Hitachi DD turntable has three-core
mains and the chassis and pickup are connected to it - don't ask me
why as I don't know. However I have never had any audible hum on the
system, and my amp and all the other separates are two-core mains.
--
Woody
harrogate3 at ntlworld dot com
|

November 29th 17, 10:02 AM
posted to uk.rec.audio
|
|
Running an amplifier unearthed
On Wed, 29 Nov 2017 09:55:35 +0100,
(D.M. Procida) wrote:
If you read uk.d-i-y, you may have seen a thread ("This appliance must
be earthed") about Dutch mains sockets, which are often unearthed.
If I plug a Cyrus 1 amplifier (which has an extremely metal case and a
stern label saying "This appliance must be earthed") into an unearthed
socket, do I risk death by electrocution, or worse, poorer sound
quality?
Daniele
Look at your system as a whole. Only one piece of equipment should
have a mains earth. Any more than that and the system will hum because
of a small 50/60Hz voltage induced into the inductance of the loop.
For safety, you will normally put the mains earth on the item that has
most metal exposed, and which you handle the most. You can choose
which it is. My choice is to earth the amplifier as it sits at the
centre of a star of connections, and is always present, whatever else
I may add or remove. Everything else is grounded by the signal cables.
d
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
|

November 29th 17, 10:57 AM
posted to uk.rec.audio
|
|
Running an amplifier unearthed
D.M. Procida wrote:
----------------------
If you read uk.d-i-y, you may have seen a thread ("This appliance must
be earthed") about Dutch mains sockets, which are often unearthed.
If I plug a Cyrus 1 amplifier (which has an extremely metal case and a
stern label saying "This appliance must be earthed") into an unearthed
socket, do I risk death by electrocution, or worse, poorer sound
quality?
** The former, poor sound is also an alternative.
FFS a "safety ground" is there for the bloody obvious reason that it prevents exposed metalwork becoming live in case of a fault inside the equipment OR some connected piece of gear has a live chassis due to an internal fault OR wrong mains plug wiring.
..... Phil
..... Phil
|
Thread Tools |
|
Display Modes |
Hybrid Mode
|
|