Peter Butler wrote:

Ok Paul, thanks for that info... but... which wires do I need to use?
Colour codes if possible?! Locations?

Sorry I can't remember the colours, it was years ago I done mine. The
easiest way of doing it is remove the switch from the driver's door pillar,
and connect an additional wire to that. Then feed the wire to one of the
other door switches (any one, the other three are all linked together
anyway), and connect your wire from the driver's door to the other switch.
However don't connect it directly, place a diode between the wire and new
connection with the band pointing towards the driver's door connection.

Finally the alarm trigger should be connected to the "other doors" circuit,
and it will now be activated on any of the doors opening because the
driver's door can trigger the "other doors" circuit, but not vice-versa
meaning you won't get the lights on beeper when a passenger door is opened.

--
Paul Morgan
Replace nospam with paul_morga to reply via e-mail