Thread
:
Silly design of speaker.
View Single Post
#
11
(
permalink
)
April 13th 18, 08:46 AM posted to uk.rec.audio
Brian Gaff
external usenet poster
Posts: 637
Silly design of speaker.
Well horses for courses etc. I'm only driving them with 12.5 wats a channel
valve amps so hardly going to get over stressed.
Brian
--
----- -
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...
Blind user, so no pictures please!
"~misfit~" wrote in message
news
Once upon a time on usenet Brian Gaff wrote:
Yes well the terminals were obviously designed on these by one
person, they are of the sprung kind, and recessed, but then some
idiot put the port on the back. Like huh?
I guess this is what you often find when they have a name as tacky as
Skytronic, which sounds like it ws made up in about 10 seconds roungd
the pub.
Not to say that they sound bad, but that their placement is critical.
I have some Skytronic kevlar mid-woofers that I bought to try as
replacements for some woofers that had died in some random JBL speakers I
had. They'd be fine in DJ or PA gear (their target market) but weren't up
to the task I bought them for.
--
Shaun.
"Humans will have advanced a long, long way when religious belief has a
cozy little classification in the DSM*."
David Melville (in r.a.s.f1)
(*Diagnostic and Statistical Manual of Mental Disorders)
Once upon a time on usenet Jim Lesurf wrote:
The term "bookshelf" in this context has come to tend to be used to
mean "small enough to be placed on a bookshelf".
I have a pair of speakers that were sold as Bookshelf speakers by the
manufacturer - Goodmans Mezzo SLs. They're ... 530 x 320 x 250 deep
(but do have their small port on the front baffle). Even back in the
1970s when they were made "bookshelf" was a very loose term that had
very little to do with an actual bookshelf.
From a review in the March 1975 issue of Gramaphone:
"The Mezzo SL is described as a bookshelf speaker, but is moderately
large for such a description, measuring 21 x 12i x 10 inches."
Putting a boxed speaker close to a wall generally boosts the bass
output. Using an open port into free air also generally boosts the
bass output. Thus a designer might design the speaker to use one
effect *or* the other, depending on if the user chooses to place it
against a wall or not.
That same review says this of the Mezzo SL:
"Connections are made via, a recessed box which helpfully carries
both a standard 2-pin polarised DIN male socket and a pair of 4mm
(banana plug) sockets. The recess allows the speakers to be placed
flat against a wall, and such positioning is likely to give just the
level of natural bass lift which bookshelf-size speakers appreciate."
Cheers,
--
Shaun.
"Humans will have advanced a long, long way when religious belief
has a cozy little classification in the DSM*."
David Melville (in r.a.s.f1)
(*Diagnostic and Statistical Manual of Mental Disorders)
So it may be that they had more "tech knowledge" than you think.
OTOH it may have been a clueless / fashion choice on the part of
the maker. Jim
In article , Brian Gaff
wrote:
I bought some fairly cheap bookshelf two unit speakers, and they
sound fine as long as they are at least a couple of foot away from
a wall as they have a port in the back of the cabinet. However they
are described as bookshelf design, and of cours as most bookshelves
are on walls this somewhat makes the port at the rear a silly
design. Not only that but they have the keyhole screw head
retainers and recessed terminals so you can hang them on the wall.
Do this and they sound like portable radios.
This is what happens when those in charge of selling stuff has no
tech knowledge of speaker design! Now if they had made the port in
the side or the bottom.... or the front for that matter! Brian
Brian Gaff
View Public Profile
View message headers
Find all posts by Brian Gaff
Find all threads started by Brian Gaff