Trying to install my own alarm in the above car. I've tried to get all the
wires from the BSI plugs so its nice and tidy but still cant find the wires
for the door trigger and the hazard lights. Door trigger should be negative
type. Tried the Haynes but it doesnt cover the Gti and even after probing
the connectors...no luck at all.

Any ideas people? Car is MY00.

Thanks!

Jim

"Jim" wrote in message
...
Trying to install my own alarm in the above car. I've tried to get all
the
wires from the BSI plugs so its nice and tidy but still cant find the
wires
for the door trigger and the hazard lights. Door trigger should be
negative
type. Tried the Haynes but it doesnt cover the Gti and even after probing
the connectors...no luck at all.

Any ideas people? Car is MY00.

Thanks!

Jim

If by door trigger you mean the central locking wires It's not as simple as
a negative pulse, the central locking has to be operated by interrupting the
motor feed in a similar manor to Hondas. If it can do this then you need to
interrupt wires 621(grey) and 620 (white) at the BLACK plug of the BSI.
Indicators are 234(green) and 234(tan) at BSI GREEN plug

Hope that helps,

Steve

www.autoelectronix.co.uk

Hey Steve.

Thanks for the info and will give the below a shot but probe em first.
BTW...how comes the numbers are so high? The BSI plug only goes up to 24 I
think.

Thanks dude!

Jim


--
..
"Steve H" wrote in message
...

"Jim" wrote in message
...
Trying to install my own alarm in the above car. I've tried to get all
the
wires from the BSI plugs so its nice and tidy but still cant find the
wires
for the door trigger and the hazard lights. Door trigger should be
negative
type. Tried the Haynes but it doesnt cover the Gti and even after
probing
the connectors...no luck at all.

Any ideas people? Car is MY00.

Thanks!

Jim

If by door trigger you mean the central locking wires It's not as simple
as
a negative pulse, the central locking has to be operated by interrupting
the
motor feed in a similar manor to Hondas. If it can do this then you need
to
interrupt wires 621(grey) and 620 (white) at the BLACK plug of the BSI.
Indicators are 234(green) and 234(tan) at BSI GREEN plug

Hope that helps,

Steve

www.autoelectronix.co.uk

OH BTW...Steve....I was thinking of using the trigger from the center
interior light as the trigger for all the doors. Do you think this is safe
or should I get the trigger from the door too? Do you know which one is the
trigger for the door light for the drivers side door? I still have either
negative or positive switch from the alarm system.

Interesting it is to install but annoying at the same time when I cant find
the correct wire.

Thanks!

Jim

--
..
"Jim" wrote in message
...
Hey Steve.

Thanks for the info and will give the below a shot but probe em first.
BTW...how comes the numbers are so high? The BSI plug only goes up to 24
I
think.

Thanks dude!

Jim


--
.
"Steve H" wrote in
message
...

"Jim" wrote in message
...
Trying to install my own alarm in the above car. I've tried to get
all
the
wires from the BSI plugs so its nice and tidy but still cant find the
wires
for the door trigger and the hazard lights. Door trigger should be
negative
type. Tried the Haynes but it doesnt cover the Gti and even after
probing
the connectors...no luck at all.

Any ideas people? Car is MY00.

Thanks!

Jim

If by door trigger you mean the central locking wires It's not as simple
as
a negative pulse, the central locking has to be operated by interrupting
the
motor feed in a similar manor to Hondas. If it can do this then you need
to
interrupt wires 621(grey) and 620 (white) at the BLACK plug of the BSI.
Indicators are 234(green) and 234(tan) at BSI GREEN plug

Hope that helps,

Steve

www.autoelectronix.co.uk

"Jim" wrote in message
...
OH BTW...Steve....I was thinking of using the trigger from the center
interior light as the trigger for all the doors. Do you think this is
safe
or should I get the trigger from the door too? Do you know which one is
the
trigger for the door light for the drivers side door? I still have either
negative or positive switch from the alarm system.

Interesting it is to install but annoying at the same time when I cant
find
the correct wire.

Thanks!

Jim

Door open trigger is yellow wire 3001 in BLUE plug of BSI, the numbers
relate to what's printed on the wire not the position in the plug!

Regards

Steve

www.autoelectronix.co.uk

Hi Steve

Checked and I have no GREEN BSI, only got 2 whites, 1 black and 1 blue.

Thanks anyway.

Jim

--
..
"Steve H" wrote in message
...

"Jim" wrote in message
...
Trying to install my own alarm in the above car. I've tried to get all
the
wires from the BSI plugs so its nice and tidy but still cant find the
wires
for the door trigger and the hazard lights. Door trigger should be
negative
type. Tried the Haynes but it doesnt cover the Gti and even after
probing
the connectors...no luck at all.

Any ideas people? Car is MY00.

Thanks!

Jim

If by door trigger you mean the central locking wires It's not as simple
as
a negative pulse, the central locking has to be operated by interrupting
the
motor feed in a similar manor to Hondas. If it can do this then you need
to
interrupt wires 621(grey) and 620 (white) at the BLACK plug of the BSI.
Indicators are 234(green) and 234(tan) at BSI GREEN plug

Hope that helps,

Steve

www.autoelectronix.co.uk

"Jim" wrote in message
...
Hi Steve

Checked and I have no GREEN BSI, only got 2 whites, 1 black and 1 blue.

Thanks anyway.

Jim

If you can't find the indicator feeds at the BSI, you could always check the
wire colours at the back lamps, then look for these colours in the sill
looms.

Regards

Steve

www.autoelectronix.co.uk