Hi there everyone - I'm new here, so please excuse me if I break any local
protocols!

I have a late 90's Ford Scorpio, and will be looking to upgrade the audio
in the near future.

I'm happy so far with the information I've found on a replacement head unit
and fascia to adapt from the current 1.8DIN aperture. I'm also happy with
the replacement for the front door speakers (once I've taken the door trim
apart to establish the size).

However, the rear speakers are currently tweeters plus midrange. I don't
want to change the look of the rear speaker enclosures, so intend to
replace the drivers within the casing already present in the car.

First question. All the speakers I look at on various websites are dual
cone - they have midrange-bass cone with a tweeter sitting in the middle. I
would have thought that I'd want them without the tweeter cone attached,
since I am fitting separate tweeters. Is there such a thing? If not, will
the crossover effectively make the integral tweeter cone obsolete, causing
the speaker to behave more like a midrange unit?

Second question. I'm used to seeing car speakers supplied with a removable
grill, so you can fit them as a new fitting with the supplied grill, or
replace existing speakers of the same size and just not use the grill. All
the tweeters I look at seem to be encased in a plastic housing, with no
indication of whether the tweeter itself comes out of this casing to
replace an existing installation. Is it possible to remove them from the
plastic casing?

Thanks in advance for your help.

--
Regards,
Dave

email:

My Homepage: http://www.daveryman.com

"Dave Ryman" wrote in message
.253...
Hi there everyone - I'm new here, so please excuse me if I break any local
protocols!

I have a late 90's Ford Scorpio, and will be looking to upgrade the audio
in the near future.

I'm happy so far with the information I've found on a replacement head
unit
and fascia to adapt from the current 1.8DIN aperture. I'm also happy with
the replacement for the front door speakers (once I've taken the door trim
apart to establish the size).

However, the rear speakers are currently tweeters plus midrange. I don't
want to change the look of the rear speaker enclosures, so intend to
replace the drivers within the casing already present in the car.

First question. All the speakers I look at on various websites are dual
cone - they have midrange-bass cone with a tweeter sitting in the middle.
I
would have thought that I'd want them without the tweeter cone attached,
since I am fitting separate tweeters. Is there such a thing? If not, will
the crossover effectively make the integral tweeter cone obsolete, causing
the speaker to behave more like a midrange unit?

Second question. I'm used to seeing car speakers supplied with a removable
grill, so you can fit them as a new fitting with the supplied grill, or
replace existing speakers of the same size and just not use the grill. All
the tweeters I look at seem to be encased in a plastic housing, with no
indication of whether the tweeter itself comes out of this casing to
replace an existing installation. Is it possible to remove them from the
plastic casing?

Thanks in advance for your help.

--
Regards,
Dave

email:

My Homepage: http://www.daveryman.com

Have a look at http://stores.ebay.co.uk/Thompsons-LTD its actually a car
audio shop in macclesfield he does component systems.Don't worry about units
with attached tweeters as long as you are putting a crossover in it just
means they won't have much to do as the hf will be channelled to the
separates, if you email the dude he bought a discount load of component
tweeters with xover which he was selling for £10 a pair. btw you can call
in the shop but they charged me a handling fee which was more than the
postage.
Derek

"Derek" wrote in
:


"Dave Ryman" wrote in message
.253...
Hi there everyone - I'm new here, so please excuse me if I break any
local protocols!

I have a late 90's Ford Scorpio, and will be looking to upgrade the
audio in the near future.

I'm happy so far with the information I've found on a replacement
head unit
and fascia to adapt from the current 1.8DIN aperture. I'm also happy
with the replacement for the front door speakers (once I've taken the
door trim apart to establish the size).

However, the rear speakers are currently tweeters plus midrange. I
don't want to change the look of the rear speaker enclosures, so
intend to replace the drivers within the casing already present in
the car.

First question. All the speakers I look at on various websites are
dual cone - they have midrange-bass cone with a tweeter sitting in
the middle. I
would have thought that I'd want them without the tweeter cone
attached, since I am fitting separate tweeters. Is there such a
thing? If not, will the crossover effectively make the integral
tweeter cone obsolete, causing the speaker to behave more like a
midrange unit?

Second question. I'm used to seeing car speakers supplied with a
removable grill, so you can fit them as a new fitting with the
supplied grill, or replace existing speakers of the same size and
just not use the grill. All the tweeters I look at seem to be encased
in a plastic housing, with no indication of whether the tweeter
itself comes out of this casing to replace an existing installation.
Is it possible to remove them from the plastic casing?

Thanks in advance for your help.

--
Regards,
Dave

email:

My Homepage: http://www.daveryman.com

Have a look at http://stores.ebay.co.uk/Thompsons-LTD its actually a
car audio shop in macclesfield he does component systems.Don't worry
about units with attached tweeters as long as you are putting a
crossover in it just means they won't have much to do as the hf will
be channelled to the separates, if you email the dude he bought a
discount load of component tweeters with xover which he was selling
for £10 a pair. btw you can call in the shop but they charged me a
handling fee which was more than the postage.
Derek




Thanks for all that. I figured the crossover would probably defeat the
built in tweeter. It surprises me that you can't buy a special-purpose
midrange, when there are tweeters and woofers out there - but then, I
guess, that's life.

I'm still pondering about tweeters - whether I can take the driver out of
the casing and use just it in the current enclosure.

I'm having a look at Thompsons now.

--
Regards,
Dave

email:

My Homepage: http://www.daveryman.com