
August 5th 06, 06:49 PM
posted to uk.rec.audio
|
|
Linn Keihlid Tweeter
Hi,
I seem to have some issue with a tweeter on one of my keihlids, in-so-much
that its not working.
I had a mishap and dropped the speaker 2 inches onto a marble floor, no
visible damage, but no tweeter.
Could it be a number of things or is it just the tweeter is busted, is
there an easy way of finding out, short of moving the good tweeter into the
bad speaker?
Info... Ideas... Ruminations, please :-)
|

August 5th 06, 08:23 PM
posted to uk.rec.audio
|
|
Linn Keihlid Tweeter
Adie wrote:
I had a mishap and dropped the speaker 2 inches onto a marble floor,
no visible damage, but no tweeter.
Could it be a number of things or is it just the tweeter is busted, is
there an easy way of finding out, short of moving the good tweeter
into the bad speaker?
I'd be inclined to consider a damaged connection or maybe a loosened
crossover component. Anything rattling around inside the box? It might be
worth taking a driver out (or panel off, etc) to check out the bits inside.
If there's nothing obvious, a tweeter swap should answer your question.
--
Wally
www.wally.myby.co.uk
You're unique - just like everybody else.
|

August 6th 06, 10:25 AM
posted to uk.rec.audio
|
|
Linn Keihlid Tweeter
On Sat, 5 Aug 2006 21:23:39 +0100, Wally wrote:
Adie wrote:
I had a mishap and dropped the speaker 2 inches onto a marble floor,
no visible damage, but no tweeter.
Could it be a number of things or is it just the tweeter is busted, is
there an easy way of finding out, short of moving the good tweeter
into the bad speaker?
I'd be inclined to consider a damaged connection or maybe a loosened
crossover component. Anything rattling around inside the box? It might be
worth taking a driver out (or panel off, etc) to check out the bits inside.
If there's nothing obvious, a tweeter swap should answer your question.
Any idea how i get into the box? Can obviously unscrew the tweeters, but
cannot find a way to get to the crossover.
Can hear something moving inside, but they weigh 20kg's so i'm not shaking
them next to me ear... :-)
|

August 6th 06, 10:39 AM
posted to uk.rec.audio
|
|
Linn Keihlid Tweeter
On Sun, 06 Aug 2006 10:25:27 GMT, Adie wrote:
Any idea how i get into the box? Can obviously unscrew the tweeters, but
cannot find a way to get to the crossover.
So unscrew the tweeters and swap them. You keep TELLING us this is
the easiest route. Why won't you take it?
|

August 6th 06, 10:51 AM
posted to uk.rec.audio
|
|
Linn Keihlid Tweeter
Adie wrote:
Any idea how i get into the box? Can obviously unscrew the tweeters,
but cannot find a way to get to the crossover.
I have no idea. If it's a sealed box, access to the crossover is probably by
removing the woofer(s). If you can't look at them and work out how to get
in, maybe you should take them to someone who can.
Can hear something moving inside, but they weigh 20kg's so i'm not
shaking them next to me ear... :-)
Is there something moving about in both boxes, or just one? If the latter,
is it the box with the fault? Does the rattle move around inside the box as
it's tilted? You don't have to shake them - just move them end over end. If
the the noise 'drops to the bottom' every time you turn them over, something
has come off, but if the noise tends to stay in one place, it could be that
one end of a wire has come loose and is hitting the inside of the box in its
vicinity.
--
Wally
www.wally.myby.co.uk
If it ain't broke, fix it until it is.
|

August 6th 06, 11:36 AM
posted to uk.rec.audio
|
|
Linn Keihlid Tweeter
On Sun, 6 Aug 2006 11:51:56 +0100, Wally wrote:
Adie wrote:
Any idea how i get into the box? Can obviously unscrew the tweeters,
but cannot find a way to get to the crossover.
I have no idea. If it's a sealed box, access to the crossover is probably by
removing the woofer(s). If you can't look at them and work out how to get
in, maybe you should take them to someone who can.
Can hear something moving inside, but they weigh 20kg's so i'm not
shaking them next to me ear... :-)
Is there something moving about in both boxes, or just one? If the latter,
is it the box with the fault? Does the rattle move around inside the box as
it's tilted? You don't have to shake them - just move them end over end. If
the the noise 'drops to the bottom' every time you turn them over, something
has come off, but if the noise tends to stay in one place, it could be that
one end of a wire has come loose and is hitting the inside of the box in its
vicinity.
screw it, i'll find a dealer in spain and send to them, too hot to frig
around juggling speakers.
thanks anyway.
|

August 5th 06, 08:44 PM
posted to uk.rec.audio
|
|
Linn Keihlid Tweeter
On Sat, 05 Aug 2006 18:49:15 GMT, Adie wrote:
I had a mishap and dropped the speaker 2 inches onto a marble floor, no
visible damage, but no tweeter.
Could it be a number of things or is it just the tweeter is busted, is
there an easy way of finding out, short of moving the good tweeter into the
bad speaker?
That seems the easy way, if you see no obvious damage.
|
Thread Tools |
|
Display Modes |
Hybrid Mode
|
|