Keith G wrote:

"Richard Lamont" wrote


The sound is supposed to come in a straight line from the speaker,
through the air, to your lugholes. It is not supposed to go via some
random scenic route involving whatever your loudspeaker is parked on.

Therefore your speakers should not be mechanically coupled to anything.
They should be mechanically isolated. Spikes are audiophool nonsense.

What you need is a nice thick sheet of neoprene rubber instead. Then the
sound will come from your speakers and not from whichever bits of your
building happen to radiate the coupled vibration. If you have carpet and
underlay then the neoprene probably isn't necessary.

I think you are missing the point entirely - the purpose of the spikes
on speakers it to enable them to be pushed through a carpet or any other
squidgy floorcovering (like you are recommending) to enable the speaker
to be coupled directly to the floor underneath and remove/reduce the
ability of the speaker to move in reaction (recoil) to the cone
movements which some claim 'blurs/renders less accurate' the created sound.

As the mass of the cone is so much less than the mass of the speaker
cabinet as a whole, this is surely idiotic. Besides, any such reaction
will also occur during manufacturer's testing and will therefore be
taken into account at the design stage.


--
Richard Lamont http://www.lamont.me.uk/

OpenPGP Key ID: 0xBD89BE41
Fingerprint: CE78 C285 1F97 0BDA 886D BA78 26D8 6C34 BD89 BE41