A Audio, hi-fi and car audio  forum. Audio Banter

Go Back   Home » Audio Banter forum » UK Audio Newsgroups » uk.rec.audio (General Audio and Hi-Fi)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.rec.audio (General Audio and Hi-Fi) (uk.rec.audio) Discussion and exchange of hi-fi audio equipment.

Making my record player sound better



 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #33 (permalink)  
Old January 18th 10, 07:39 AM posted to uk.rec.audio
Jim Lesurf[_2_]
external usenet poster
 
Posts: 2,668
Default Making my record player sound better

In article , Trevor Wilson
wrote:

"Jim Lesurf" wrote in message
...
In article , Trevor Wilson
wrote:




Any faults with the existing equipment will permanently damage
any (expensive) test recording (IOW: Subsequent playback will
likely reveal faults that do not exist, due to prior damage).

Only if the problems are really severe, and usually only after a
number of playings.


**WRONG! A chipped stylus will cause immediate and permanent damage.


What part of the OP makes you sure he has a chipped stylus? Must admit
that what he describes doesn't sound like that to me.


**Since I have not examined the system in question, I don't know. In
such cases, I always err on the conservative side. Without performing
the necessary static tests and measurements, one cannot predict how
safe it is to play a recording on that TT. Performing the tests is just
good, logical common-sense. Whacking a good disk on risks damage.



TBH it sound more like the end of side and mistracking behaviours I
used to find were the norm for 'Linn' carts and stylii many years ago
even when they were in the state as sold. One of the reasons I never
liked Linn systems. So if I were him I'd tend to simply take the
advice offerred by others and get a new and better cartridge/stylus
and not bother with the one he has. Then use a test disc to check he
has it setup well.


**Whilst I have no objection to installing a new stylus/cartridge on the
arm (since that is where the fault likely lies), performing basic tests
and measurements should be part of the procedure. Testing the existing
set-up with a test disk makes zero sense.


I note your opinion but do not share it. I'd recommend you re-read what the
OP actually wrote, and note the details. Looks to me like basic mistracking
due to a poor cartridge, misalignment, or normal wear. The symptoms don't
seem like a 'chipped stylus' to me.

Slainte,

jim

--
Please use the address on the audiomisc page if you wish to email me.
Electronics http://www.st-and.ac.uk/~www_pa/Scot...o/electron.htm
Armstrong Audio http://www.audiomisc.co.uk/Armstrong/armstrong.html
Audio Misc http://www.audiomisc.co.uk/index.html

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 09:29 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.SEO by vBSEO 3.0.0
Copyright ©2004-2025 Audio Banter.
The comments are property of their posters.