A Audio, hi-fi and car audio  forum. Audio Banter

Go Back   Home » Audio Banter forum » UK Audio Newsgroups » uk.rec.audio (General Audio and Hi-Fi)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.rec.audio (General Audio and Hi-Fi) (uk.rec.audio) Discussion and exchange of hi-fi audio equipment.

Making my record player sound better



 
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old January 13th 10, 04:43 PM posted to uk.rec.audio
D.M. Procida
external usenet poster
 
Posts: 140
Default Making my record player sound better

My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).

However, on some records, it can sound a bit glassy. I don't know if
that's the right word. In louder passages - especially towards the end
of a side, I *think* - sustained notes seem to have a brittle edge to
them.

Because nearly all of my vinyl records are second-hand, it's hard to
know whether the records are worn or the player isn't playing them well.

Are there some basic adjustments I should check, or would I be better
taking it to a hi-fi shop and asking them to check it's set it up
properly?

I'm quite happy taking things apart and making mechanical adjustments,
but I haven't done much messing about with record players.

Daniele
  #2 (permalink)  
Old January 13th 10, 04:57 PM posted to uk.rec.audio
Keith G[_2_]
external usenet poster
 
Posts: 2,151
Default Making my record player sound better

D.M. Procida wrote:
My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).

However, on some records, it can sound a bit glassy. I don't know if
that's the right word. In louder passages - especially towards the end
of a side, I *think* - sustained notes seem to have a brittle edge to
them.

Because nearly all of my vinyl records are second-hand, it's hard to
know whether the records are worn or the player isn't playing them well.

Are there some basic adjustments I should check, or would I be better
taking it to a hi-fi shop and asking them to check it's set it up
properly?

I'm quite happy taking things apart and making mechanical adjustments,
but I haven't done much messing about with record players.

Daniele



Valve amplification and/or phono stage usually cures most ills with
vinyl replay kit, but what cartridge are you using?
  #3 (permalink)  
Old January 13th 10, 05:05 PM posted to uk.rec.audio
D.M. Procida
external usenet poster
 
Posts: 140
Default Making my record player sound better

Keith G wrote:

My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).

However, on some records, it can sound a bit glassy.


Valve amplification and/or phono stage usually cures most ills with
vinyl replay kit, but what cartridge are you using?


It's a Linn K5.

I hadn't thought it would be an amplification problem, but more likely
to do with the mechanical set-up.

Daniele
  #4 (permalink)  
Old January 13th 10, 06:56 PM posted to uk.rec.audio
Keith G[_2_]
external usenet poster
 
Posts: 2,151
Default Making my record player sound better

D.M. Procida wrote:
Keith G wrote:

My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).

However, on some records, it can sound a bit glassy.

Valve amplification and/or phono stage usually cures most ills with
vinyl replay kit, but what cartridge are you using?


It's a Linn K5.

I hadn't thought it would be an amplification problem, but more likely
to do with the mechanical set-up.

Daniele



OK. First step is to try a new stylus - an AT-95E will fit and work
fine, if look a little strange. 22 spons from Mantra:

https://shop.mantra-audio.co.uk/acat...ca_stylus.html


But double check the fit first, to be certain...
  #5 (permalink)  
Old January 15th 10, 02:04 PM posted to uk.rec.audio
mick
external usenet poster
 
Posts: 54
Default Making my record player sound better

On Wed, 13 Jan 2010 19:56:57 +0000, Keith G wrote:

D.M. Procida wrote:
Keith G wrote:

My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).

However, on some records, it can sound a bit glassy.
Valve amplification and/or phono stage usually cures most ills with
vinyl replay kit, but what cartridge are you using?


It's a Linn K5.

I hadn't thought it would be an amplification problem, but more likely
to do with the mechanical set-up.

Daniele



OK. First step is to try a new stylus - an AT-95E will fit and work
fine, if look a little strange. 22 spons from Mantra:

https://shop.mantra-audio.co.uk/acat...ca_stylus.html


But double check the fit first, to be certain...



I don't think you can do that. IIRC the K5 stylus is bonded in. It would
make more sense to change the cartridge for an AT-95E. It's similar in
many ways and has the benefit of a changeable stylus. 34 quid from same
place.

--
Mick (Working in a M$-free zone!)
Web: http://www.nascom.info
Filtering everything posted from googlegroups to kill spam.
  #6 (permalink)  
Old January 15th 10, 03:13 PM posted to uk.rec.audio
Eiron
external usenet poster
 
Posts: 782
Default Making my record player sound better

mick wrote:
On Wed, 13 Jan 2010 19:56:57 +0000, Keith G wrote:

D.M. Procida wrote:
Keith G wrote:

My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).

However, on some records, it can sound a bit glassy.
Valve amplification and/or phono stage usually cures most ills with
vinyl replay kit, but what cartridge are you using?
It's a Linn K5.

I hadn't thought it would be an amplification problem, but more likely
to do with the mechanical set-up.

Daniele


OK. First step is to try a new stylus - an AT-95E will fit and work
fine, if look a little strange. 22 spons from Mantra:

https://shop.mantra-audio.co.uk/acat...ca_stylus.html


But double check the fit first, to be certain...



I don't think you can do that. IIRC the K5 stylus is bonded in.


Are you sure? Perhaps you were pulling it forward instead of down.
The K9 stylus isn't glued in.

--
Eiron.
  #8 (permalink)  
Old January 13th 10, 05:19 PM posted to uk.rec.audio
D.M. Procida
external usenet poster
 
Posts: 140
Default Making my record player sound better

Laurence Payne wrote:

My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).

However, on some records, it can sound a bit glassy. I don't know if
that's the right word. In louder passages - especially towards the end
of a side, I *think* - sustained notes seem to have a brittle edge to
them.


Newly set-up system or a gradually-increasing problem? You may just
be hearing one of the reasons we now use digital playback :-)


I've recently set it up after a year or so packed away for building
work. But I didn't do any adjustments.

I have noticed this glassiness before, but now I want to do something
about it.

Daniele
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 08:28 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.SEO by vBSEO 3.0.0
Copyright ©2004-2025 Audio Banter.
The comments are property of their posters.