A Audio, hi-fi and car audio  forum. Audio Banter

Go Back   Home » Audio Banter forum » UK Audio Newsgroups » uk.rec.audio (General Audio and Hi-Fi)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.rec.audio (General Audio and Hi-Fi) (uk.rec.audio) Discussion and exchange of hi-fi audio equipment.

Making my record player sound better



 
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old January 13th 10, 04:43 PM posted to uk.rec.audio
D.M. Procida
external usenet poster
 
Posts: 140
Default Making my record player sound better

My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).

However, on some records, it can sound a bit glassy. I don't know if
that's the right word. In louder passages - especially towards the end
of a side, I *think* - sustained notes seem to have a brittle edge to
them.

Because nearly all of my vinyl records are second-hand, it's hard to
know whether the records are worn or the player isn't playing them well.

Are there some basic adjustments I should check, or would I be better
taking it to a hi-fi shop and asking them to check it's set it up
properly?

I'm quite happy taking things apart and making mechanical adjustments,
but I haven't done much messing about with record players.

Daniele
  #2 (permalink)  
Old January 13th 10, 04:57 PM posted to uk.rec.audio
Keith G[_2_]
external usenet poster
 
Posts: 2,151
Default Making my record player sound better

D.M. Procida wrote:
My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).

However, on some records, it can sound a bit glassy. I don't know if
that's the right word. In louder passages - especially towards the end
of a side, I *think* - sustained notes seem to have a brittle edge to
them.

Because nearly all of my vinyl records are second-hand, it's hard to
know whether the records are worn or the player isn't playing them well.

Are there some basic adjustments I should check, or would I be better
taking it to a hi-fi shop and asking them to check it's set it up
properly?

I'm quite happy taking things apart and making mechanical adjustments,
but I haven't done much messing about with record players.

Daniele



Valve amplification and/or phono stage usually cures most ills with
vinyl replay kit, but what cartridge are you using?
  #4 (permalink)  
Old January 13th 10, 05:05 PM posted to uk.rec.audio
D.M. Procida
external usenet poster
 
Posts: 140
Default Making my record player sound better

Keith G wrote:

My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).

However, on some records, it can sound a bit glassy.


Valve amplification and/or phono stage usually cures most ills with
vinyl replay kit, but what cartridge are you using?


It's a Linn K5.

I hadn't thought it would be an amplification problem, but more likely
to do with the mechanical set-up.

Daniele
  #5 (permalink)  
Old January 13th 10, 05:10 PM posted to uk.rec.audio
Jim Lesurf[_2_]
external usenet poster
 
Posts: 2,668
Default Making my record player sound better

In article
,
D.M. Procida wrote:
My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).


However, on some records, it can sound a bit glassy. I don't know if
that's the right word. In louder passages - especially towards the end
of a side, I *think* - sustained notes seem to have a brittle edge to
them.


FWIW The Linn sourced carts I had experience of many years ago tended to
mistrack badly, particulary with HF on inner grooves. So a change of
cartridge may help.

Alternatively it may be misaligned or the stylus worn (since you don't say
how old the stylus is).

To check you could buy something like the 'Ultimate Analogue' test LP and
see what you get.

Because nearly all of my vinyl records are second-hand, it's hard to
know whether the records are worn or the player isn't playing them well.


Yes, it could be wear of the discs. Can't say.

Are there some basic adjustments I should check, or would I be better
taking it to a hi-fi shop and asking them to check it's set it up
properly?


cf above.

Slainte,

Jim

--
Please use the address on the audiomisc page if you wish to email me.
Electronics http://www.st-and.ac.uk/~www_pa/Scot...o/electron.htm
Armstrong Audio http://www.audiomisc.co.uk/Armstrong/armstrong.html
Audio Misc http://www.audiomisc.co.uk/index.html

  #6 (permalink)  
Old January 13th 10, 05:12 PM posted to uk.rec.audio
Don Pearce[_3_]
external usenet poster
 
Posts: 1,358
Default Making my record player sound better

On Wed, 13 Jan 2010 17:43:05 +0000,
(D.M. Procida) wrote:

My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).

However, on some records, it can sound a bit glassy. I don't know if
that's the right word. In louder passages - especially towards the end
of a side, I *think* - sustained notes seem to have a brittle edge to
them.

Because nearly all of my vinyl records are second-hand, it's hard to
know whether the records are worn or the player isn't playing them well.

Are there some basic adjustments I should check, or would I be better
taking it to a hi-fi shop and asking them to check it's set it up
properly?

I'm quite happy taking things apart and making mechanical adjustments,
but I haven't done much messing about with record players.

Daniele


I think you really need to find out whether it is the discs or the
machine before you get the hammer and spanners out. Do you have any
friends with a record player? If so, take the worst offenders over and
listen.

Unfortunately records that have been played on a machine that can't
reproduce high velocities have bee wrecked by them - the peaks have
been machined off. That can give rise to what you hear.

d
  #7 (permalink)  
Old January 13th 10, 05:19 PM posted to uk.rec.audio
D.M. Procida
external usenet poster
 
Posts: 140
Default Making my record player sound better

Laurence Payne wrote:

My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).

However, on some records, it can sound a bit glassy. I don't know if
that's the right word. In louder passages - especially towards the end
of a side, I *think* - sustained notes seem to have a brittle edge to
them.


Newly set-up system or a gradually-increasing problem? You may just
be hearing one of the reasons we now use digital playback :-)


I've recently set it up after a year or so packed away for building
work. But I didn't do any adjustments.

I have noticed this glassiness before, but now I want to do something
about it.

Daniele
  #9 (permalink)  
Old January 13th 10, 05:46 PM posted to uk.rec.audio
Eiron
external usenet poster
 
Posts: 782
Default Making my record player sound better

D.M. Procida wrote:
Laurence Payne wrote:

My record player sounds pretty good, on the whole (it's a Linn Basik
with Linn arm and cartridge that I got about 17 or 18 years ago).

However, on some records, it can sound a bit glassy. I don't know if
that's the right word. In louder passages - especially towards the end
of a side, I *think* - sustained notes seem to have a brittle edge to
them.

Newly set-up system or a gradually-increasing problem? You may just
be hearing one of the reasons we now use digital playback :-)


I've recently set it up after a year or so packed away for building
work. But I didn't do any adjustments.

I have noticed this glassiness before, but now I want to do something
about it.

Daniele


Try adding some capacitance to the cartridge load.
It may be that the cable and amplifier load doesn't provide enough for
the cartridge.

If you have a pair of F-F phono couplers you could easily add another
interconnect;
a metre or so would add 50-100pF and you could hear if it makes a
difference.

--
Eiron.
  #10 (permalink)  
Old January 13th 10, 05:52 PM posted to uk.rec.audio
Laurence Payne[_2_]
external usenet poster
 
Posts: 397
Default Making my record player sound better

On Wed, 13 Jan 2010 18:46:21 +0000, Eiron wrote:

Try adding some capacitance to the cartridge load.
It may be that the cable and amplifier load doesn't provide enough for
the cartridge.

If you have a pair of F-F phono couplers you could easily add another
interconnect;
a metre or so would add 50-100pF and you could hear if it makes a
difference.


It's on "some records" possible more so on the inner tracks. Will
cartridge loading really affect mistracking?
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 08:02 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.SEO by vBSEO 3.0.0
Copyright ©2004-2025 Audio Banter.
The comments are property of their posters.