
October 1st 06, 06:20 PM
posted to uk.rec.audio
|
|
Too damn old for this silliness...
"Don Pearce" wrote in message
...
On Sun, 1 Oct 2006 17:53:13 +0100, "Keith G"
wrote:
"Don Pearce" wrote
Yebbut, do practice turning down until it isn't clipping any more.
The volume on the amp is at 8 o' clock and not loud in the room, the gain
on
the preamp is about 20% (if that) of max, the sliders in SF are nearly on
the floor - it records fine (OK, maybe up to 0.0 on the heavy ****, but
the
'clip flags' don't come on).....
...and then the fekkin thing clips on playback.....???
Need to get the socket set out, I suspect....
Well, those pics are really heavily clipped. Fire up the windows
mixer, click the advanced button on the mic input and take away the
tick from the 20dB gain box. That should make the sliders and levels a
bit friendlier.
Noop - the recordings are single channel from the mic's pre into my
'computer amp' Aux Input and Tape Out to the computer.
Here's the last batch - A and B are the same setup as Bangs A and B, C and D
are swapped about a bit. The 'dual mono' workaround was employed to avoid
the -6dB SF brick wall (??) and provide two channels of music - with a
little adjustment here and there to avoid clipping, but it wasn't a breeze!!
So.....
Which twin has the Toni..??
http://www.apah69.dsl.pipex.com/show/Track%2085%20A.mp3
http://www.apah69.dsl.pipex.com/show/Track%2085%20B.mp3
http://www.apah69.dsl.pipex.com/show/Track%2085%20C.mp3
http://www.apah69.dsl.pipex.com/show/Track%2085%20D.mp3
Here's the original CD track for reference - stereo, of course!!
http://www.apah69.dsl.pipex.com/show...2085%20Ref.mp3
Pick the winner and I will reveal all.....
(At least it was an interesting and useful way of frittering away a
decidedly *autumnal* afternoon - it has bucketted down here! :-)
|

October 1st 06, 06:42 PM
posted to uk.rec.audio
|
|
Too damn old for this silliness...
On Sun, 1 Oct 2006 19:20:05 +0100, "Keith G"
wrote:
"Don Pearce" wrote in message
...
On Sun, 1 Oct 2006 17:53:13 +0100, "Keith G"
wrote:
"Don Pearce" wrote
Yebbut, do practice turning down until it isn't clipping any more.
The volume on the amp is at 8 o' clock and not loud in the room, the gain
on
the preamp is about 20% (if that) of max, the sliders in SF are nearly on
the floor - it records fine (OK, maybe up to 0.0 on the heavy ****, but
the
'clip flags' don't come on).....
...and then the fekkin thing clips on playback.....???
Need to get the socket set out, I suspect....
Well, those pics are really heavily clipped. Fire up the windows
mixer, click the advanced button on the mic input and take away the
tick from the 20dB gain box. That should make the sliders and levels a
bit friendlier.
Noop - the recordings are single channel from the mic's pre into my
'computer amp' Aux Input and Tape Out to the computer.
Here's the last batch - A and B are the same setup as Bangs A and B, C and D
are swapped about a bit. The 'dual mono' workaround was employed to avoid
the -6dB SF brick wall (??) and provide two channels of music - with a
little adjustment here and there to avoid clipping, but it wasn't a breeze!!
So.....
Which twin has the Toni..??
http://www.apah69.dsl.pipex.com/show/Track%2085%20A.mp3
http://www.apah69.dsl.pipex.com/show/Track%2085%20B.mp3
http://www.apah69.dsl.pipex.com/show/Track%2085%20C.mp3
http://www.apah69.dsl.pipex.com/show/Track%2085%20D.mp3
Here's the original CD track for reference - stereo, of course!!
http://www.apah69.dsl.pipex.com/show...2085%20Ref.mp3
Pick the winner and I will reveal all.....
(At least it was an interesting and useful way of frittering away a
decidedly *autumnal* afternoon - it has bucketted down here! :-)
Well B and D both have the same problem of a horrifying fizzy
distorted top end, although I have to say that they are all (apart
from the reference) very lacking in bass. If these have been recorded
through the Behringer mic, that is down to the speakers. We also have
the rapid dropoff above 10kHz on all of the speaker files - again, not
down to the mic any more.
So what is it with B and D? I'm actually surprised you can bear to
listen to them, they are just horrible.
d
--
Pearce Consulting
http://www.pearce.uk.com
|

October 1st 06, 07:47 PM
posted to uk.rec.audio
|
|
Too damn old for this silliness...
Keith G wrote:
Which twin has the Toni..??
Pick the winner and I will reveal all.....
Of the four 'system sounds' I would pick 3. Best bottom end.
--
Wally
www.wally.myby.co.uk
I eat my peas with honey, I've done it all my life.
It makes the peas taste funny, but it keeps them on the knife.
(Spike Milligan)
|

October 1st 06, 08:30 PM
posted to uk.rec.audio
|
|
Too damn old for this silliness...
"Don Pearce" wrote
Well B and D both have the same problem of a horrifying fizzy
distorted top end, although I have to say that they are all (apart
from the reference) very lacking in bass. If these have been recorded
through the Behringer mic, that is down to the speakers. We also have
the rapid dropoff above 10kHz on all of the speaker files - again, not
down to the mic any more.
So what is it with B and D? I'm actually surprised you can bear to
listen to them, they are just horrible.
I don't - they bear virtually no relation to what I hear for real!! (Despite
the Behringer is a million % better than the little lapel mic!!)
I think I know what at least part of the problem is here - I aimed the mic
at the 'other' speakers and haven't moved throughout all the recordings. I
guess it was therefore well 'off axis' for B & D, although I thought it
probably wouldn't matter much. (How do you 'aim' a mic when the bass is
coming off the rear wall...??)
Anyway, thanks for that - although you most certainly *haven't* confirmed
out the speakers I was hoping you would!!
The setup was as follows:
Pioneer DV-350 DVDP (enables easy track selection by number)
Denon PMA-655R ss amp (50wpc, I believe)
2A3 SET (4 wpc) via 'pre out' from Denon
Lowther PM6Cs in Jericho cabinets
Lowther EX3s in (In)Fidelio cabinets
The tracks were as follows:
A = Denon/PM6C
B = 2A3/EX3
C = 2A3/PM6C
D = Denon/EX3
(I have listened to them all on cheapo Sennheiser HD 202 cans and don't like
any of them, including the CD direct 'reference' track which sounds like its
got a foghorn/wet fart blowing all the way through it!!)
Thanks for your efforts, anyway - have a good evening...!! ;-)
|

October 1st 06, 08:31 PM
posted to uk.rec.audio
|
|
Too damn old for this silliness...
"Wally" wrote in message
...
Keith G wrote:
Which twin has the Toni..??
Pick the winner and I will reveal all.....
Of the four 'system sounds' I would pick 3. Best bottom end.
Wrong answer, Wally....
;-)
See my reply to Don for details...!!
|

October 1st 06, 08:44 PM
posted to uk.rec.audio
|
|
Too damn old for this silliness...
On Sun, 1 Oct 2006 21:30:26 +0100, "Keith G"
wrote:
So what is it with B and D? I'm actually surprised you can bear to
listen to them, they are just horrible.
I don't - they bear virtually no relation to what I hear for real!! (Despite
the Behringer is a million % better than the little lapel mic!!)
Try an experiment. Stick a finger on one ear while you listen - it
turns off some of the brains compensation mechanisms. Does it sound a
little more like the recordings now?
Incidentally, you should never play a recording back in the room it
was made in - every unflatness multiplies, and the whole thing sounds
appalling.
I think I know what at least part of the problem is here - I aimed the mic
at the 'other' speakers and haven't moved throughout all the recordings. I
guess it was therefore well 'off axis' for B & D, although I thought it
probably wouldn't matter much. (How do you 'aim' a mic when the bass is
coming off the rear wall...??)
When you say off axis, do you mean off the mic's axis, or off the
speaker's axis? That mic has a great pattern, so going off axis won't
matter. The speaker is more worrisome. You normally expect to lose
treble when you move off a speaker's axis, but this seems to have
gained the better part of 20dB; that should be impossible.
Anyway, thanks for that - although you most certainly *haven't* confirmed
out the speakers I was hoping you would!!
The setup was as follows:
Pioneer DV-350 DVDP (enables easy track selection by number)
Denon PMA-655R ss amp (50wpc, I believe)
2A3 SET (4 wpc) via 'pre out' from Denon
Lowther PM6Cs in Jericho cabinets
Lowther EX3s in (In)Fidelio cabinets
The tracks were as follows:
A = Denon/PM6C
B = 2A3/EX3
C = 2A3/PM6C
D = Denon/EX3
Well that confirms that the big differences are the speakers, not the
rest of the kit.
(I have listened to them all on cheapo Sennheiser HD 202 cans and don't like
any of them, including the CD direct 'reference' track which sounds like its
got a foghorn/wet fart blowing all the way through it!!)
Well, it was your choice ;-)
Thanks for your efforts, anyway - have a good evening...!! ;-)
Welcome.
d
--
Pearce Consulting
http://www.pearce.uk.com
|

October 1st 06, 10:25 PM
posted to uk.rec.audio
|
|
Too damn old for this silliness...
Keith G wrote:
Of the four 'system sounds' I would pick 3. Best bottom end.
Wrong answer, Wally....
;-)
See my reply to Don for details...!!
Was I supposed to identify something? I was just picking the one I
preferred...
--
Wally
www.wally.myby.co.uk
If it ain't broke, fix it until it is.
|

October 1st 06, 10:30 PM
posted to uk.rec.audio
|
|
Too damn old for this silliness...
Keith G wrote:
The tracks were as follows:
A = Denon/PM6C
B = 2A3/EX3
C = 2A3/PM6C
D = Denon/EX3
I also thought A had better bass - same speakers as my preference of C. I
felt C sounded a bit smoother than A. B and D lacked bottom end and sounded
too bright.
--
Wally
www.wally.myby.co.uk
Call me a saint, call me a sinner - just don't call me... late for
dinner.
|

October 1st 06, 11:07 PM
posted to uk.rec.audio
|
|
Too damn old for this silliness...
"Wally" wrote in message
...
Keith G wrote:
Of the four 'system sounds' I would pick 3. Best bottom end.
Wrong answer, Wally....
;-)
See my reply to Don for details...!!
Was I supposed to identify something? I was just picking the one I
preferred...
I'm only yanking yer chain - you (and a thousand others) were supposed to
pick track B or D with the EX3 drivers! Kinda ain't quite worked out the way
I wanted, so.....
....I've heaved a ton and a half of iron about tonight to end up EXACTLY
WHERE I STARTED!!!
I need to shift either of these pairs of speakers out:
http://www.apah69.dsl.pipex.com/show/Lowther06.JPG
they are stealing each other's air!! (And reducing what bass is available!!)
|
Thread Tools |
|
Display Modes |
Linear Mode
|
|