Don Pearce Lying Charlatan
 

"Don Pearce Lying Charlatan "


EMC screening is just as important as ever for a serious recording
facility.
Continuous welded 2mm mild steel typically does the job.

Graham

That is magnetic screening - totally different thing to EMC screening.

** Wot UTTER ******** !!


Oh no! Phil's just proved me wrong AGAIN!


** No disproof is EVER required when some nut case pommy charlatan
and ****** makes a completely insane & UNSUPPORTED assertion.


Whatever am I to do?


** Go eat a box full of rat bait and vomit blood till you die

- you vile, ASD ****ed, stinking pommy ****.



So in your world, mild steel is not used for magnetic screening.


** Funny how that is NOTHING like the utter **** you claimed above.


Go eat a box full of rat bait and vomit blood till you die

- you vile, ASD ****ed, stinking pommy ****.



...... Phil

Don Pearce Lying Charlatan
 

Phil Allison wrote:
"Don Pearce Lying Charlatan "


EMC screening is just as important as ever for a serious recording
facility.
Continuous welded 2mm mild steel typically does the job.

Graham

That is magnetic screening - totally different thing to EMC screening.
** Wot UTTER ******** !!


Oh no! Phil's just proved me wrong AGAIN!

** No disproof is EVER required when some nut case pommy charlatan
and ****** makes a completely insane & UNSUPPORTED assertion.


Whatever am I to do?

** Go eat a box full of rat bait and vomit blood till you die

- you vile, ASD ****ed, stinking pommy ****.


So in your world, mild steel is not used for magnetic screening.


** Funny how that is NOTHING like the utter **** you claimed above.



Got me again, Phil. What I said was (and I quote) "That is magnetic
screening - totally different thing to EMC screening.". You prove me
wrong every time. I bow before you.

d

Don Pearce Lying Charlatan
 

"Don Pearce Lying Charlatan "


EMC screening is just as important as ever for a serious recording
facility.
Continuous welded 2mm mild steel typically does the job.

Graham

That is magnetic screening - totally different thing to EMC
screening.
** Wot UTTER ******** !!


Oh no! Phil's just proved me wrong AGAIN!

** No disproof is EVER required when some nut case pommy charlatan
and ****** makes a completely insane & UNSUPPORTED assertion.


Whatever am I to do?

** Go eat a box full of rat bait and vomit blood till you die

- you vile, ASD ****ed, stinking pommy ****.


So in your world, mild steel is not used for magnetic screening.


** Funny how that is NOTHING like the utter **** you claimed above.



Got me again, Phil. What I said was (and I quote) "That is magnetic
screening - totally different thing to EMC screening.".



** **** OFF you INSANE LIAR.




........ Phil

Don Pearce Lying Charlatan
 

Phil Allison wrote:
"Don Pearce Lying Charlatan "

EMC screening is just as important as ever for a serious recording
facility.
Continuous welded 2mm mild steel typically does the job.

Graham

That is magnetic screening - totally different thing to EMC
screening.
** Wot UTTER ******** !!


Oh no! Phil's just proved me wrong AGAIN!
** No disproof is EVER required when some nut case pommy charlatan
and ****** makes a completely insane & UNSUPPORTED assertion.


Whatever am I to do?
** Go eat a box full of rat bait and vomit blood till you die

- you vile, ASD ****ed, stinking pommy ****.

So in your world, mild steel is not used for magnetic screening.

** Funny how that is NOTHING like the utter **** you claimed above.


Got me again, Phil. What I said was (and I quote) "That is magnetic
screening - totally different thing to EMC screening.".



** **** OFF you INSANE LIAR.




....... Phil



Phil, old chap. In your world do posts vanish when you have read them?
Because they don't anywhere else, you know. We can all still read
exactly what I wrote. Sorry to burst your bubble.

d

Dirty Digital [sic.]
 

Don Pearce wrote:

Eeyore wrote:
Don Pearce wrote:

The equipment you use in your studio should have all the screening it
needs built into it. A Faraday cage for electric guitar is all the extra
that should ever be needed.

Try installing a studio near a railway track. You know how they do signalling ?

Remember what I was saying earlier about structure-borne LF noise?
Install a studio near a railway track and you will very quickly find out
why you don't do that

Just done one, well Westwick has.


, and it has nothing to do with signalling.

I believe that's what it is. Funny warbling noises. I may have it on MD somewhere.


Oh, and they do signalling through wires, not radio.

Who said anything about radio ?

Graham

Dirty Digital [sic.]
 

Don Pearce wrote:

Eeyore wrote:
tony sayer wrote:
Phil scribeth thus
"tony sayer"

I know several recentish studios supervised by my 'mate' that have had
whole building EMC screens installed.
They really -necessary- these days?...

** When were the laws of physics repealed - Tony ?
Well to my knowledge they haven't as yet;)..

Good. You'll have heard of this thing called 'electro-magnetic induction' in that
case.

Can you please go and rad up on this subject, because you are muddled.
There is no "electromagnetic" induction. Induction is a purely magnetic
phenomenon.

http://en.wikipedia.org/wiki/Faraday's_law_of_induction#Terminology

" The phenomenon of electromagnetic induction, connecting the electromotive force with
relation to the magnetic flux through the circuit ...... "

Graham

Dirty Digital [sic.]
 

Eeyore wrote:

Don Pearce wrote:

Eeyore wrote:
Don Pearce wrote:

The equipment you use in your studio should have all the screening it
needs built into it. A Faraday cage for electric guitar is all the extra
that should ever be needed.
Try installing a studio near a railway track. You know how they do signalling ?
Remember what I was saying earlier about structure-borne LF noise?
Install a studio near a railway track and you will very quickly find out
why you don't do that

Just done one, well Westwick has.


, and it has nothing to do with signalling.

I believe that's what it is. Funny warbling noises. I may have it on MD somewhere.

Interested to hear it.

Oh, and they do signalling through wires, not radio.

Who said anything about radio ?

Graham


Kind of needs to be wireless to radiate to a nearby building.

d

Dirty Digital [sic.]
 

Don Pearce wrote:

Eeyore wrote:
Don Pearce wrote:
Eeyore wrote:
tony sayer wrote:
Eeyore scribeth thus

You're looking in the wrong places in the spectrum btw. Amateurs !
Where would you suggest then?..
The AUDIO frequency band maybe ? Talk about missing the bleeding obvious.

In my little description of making tests did I once mention a receiver ?
You find the EMI in the audio band is the big problem? That has to be a
first for me. What are the big sources, do you find? And what is the
pickup mechanism - I mean as a fraction of a wavelength, everything in a
studio is tiny, hardly an antenna.

Describe the construction of a dynamic microphone. Or a tape head.

You answer mine first.

I don't see one.

Know tell me what's common to transducers like dynamic mics and tape heads, Oh
and the classic guitar pickup ! Hint: it involves wire, quite a lot of it and
.......

Graham

Dirty Digital [sic.]
 

Eeyore wrote:

Don Pearce wrote:

Eeyore wrote:
tony sayer wrote:
Phil scribeth thus
"tony sayer"

I know several recentish studios supervised by my 'mate' that have had
whole building EMC screens installed.
They really -necessary- these days?...
** When were the laws of physics repealed - Tony ?
Well to my knowledge they haven't as yet;)..
Good. You'll have heard of this thing called 'electro-magnetic induction' in that
case.
Can you please go and rad up on this subject, because you are muddled.
There is no "electromagnetic" induction. Induction is a purely magnetic
phenomenon.

http://en.wikipedia.org/wiki/Faraday's_law_of_induction#Terminology

" The phenomenon of electromagnetic induction, connecting the electromotive force with
relation to the magnetic flux through the circuit ...... "

Graham


Whoever wrote that has it wrong.

d

Dirty Digital [sic.]
 

Don Pearce wrote:

Eeyore wrote:

The EMC regs require where relevant *magnetic* compatability.

Where relevant.

It's a specified test in EN55103-2.

" Electromagnetic compatibility. Product family standard for audio, video, audio-visual
and entertainment lighting control apparatus for professional use. Immunity "

http://standards.mackido.com/en/en-s...view_6542.html

Graham